during the scheduled recording to stop it any time. If you wish to continue the scheduled recording, press the REC button 6 to proceed.
Note : You can proceed to start the scheduled recording from the current time if it is in the scheduled interlude as soon as setting is completed, and come out from the menu to start recording.
Note : If you activate the recording function before the scheduled recording, the unit will operate recording as shown in the diagram below and keep those Images in different files.
|
| START | END |
| START | END | ||||||
03:00 |
|
|
|
|
|
|
|
|
|
|
| |
06:00 | 08:00 |
| 12:00 | 14:00 | ||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
Start Manual |
| Timer |
|
|
| Manual |
| Timer |
|
| Manual | |
|
|
|
|
|
|
| ||||||
Recording |
|
|
|
|
|
|
|
|
|
|
| |
3.2.3 Alarm / Motion Recording
Take the following steps to activate the programmed alarm recording. For the ALM
OPERATION, REC RATE, REC QUALITY, AUDIO, ALM TYPE, ALM DURATION, and
4.2for more details.
(1) Press the Setup button 9 to enter the
MAIN MENU.
(2)Select ALARM / MOTION and press the Enter button 15 to enter the ALARM /
MOTION.
(3)Set the desired REC RATE, REC QUALITY, ALM TYPE, and ALM DURATION for use. If audio is required, set AUDIO to ON. If
(4)To activate/deactivate the alarm recording, set ALM OPERATION to ON/ OFF.
18
MAIN MENU
RECORD
ALARM / MOTION
CLOCK/ TIMER
COMMUNICATION
DISK
SYSTEM
GOTO ALARM/ MOTION PAGE
ALARM/ MOTION
ALM OPERATION | : ON | ||
REC RATE | : 30 F/S | ||
REC QUALITY | : BEST | ||
AUDIO | : OFF | ||
ALM TYPE | : NO | ||
ALM DURATION | : 0 SEC | ||
: OFF | |||
MOTION SETTING |
| ||
|
| MAIN PAGE |
|
|
|
| |
(5)To active the motion alarm recording, select MOTION SETTING and press the Enter button 15 to enter the MOTION SETTING PAGE, set MOTION ENABLE TO ON, and set a suitable SENSITIVITY and REGION according to the video sources.
| MAIN MENU |
|
|
|
| ALARM/ MOTION | ||
| RECORD |
|
| ALM OPERATION | : OFF | |||
| ALARM / MOTION |
|
|
| REC RATE | : 30 F/S | ||
| CLOCK/ TIMER |
|
| REC QUALITY | : BEST | |||
|
|
| AUDIO | : OFF | ||||
| COMMUNICATION |
|
| |||||
|
|
| ALM TYPE | : NO | ||||
| DISK |
|
| |||||
|
|
| ALM DURATION | : 0 SEC | ||||
| SYSTEM |
|
| : OFF | ||||
|
|
|
|
| MOTION SETTING |
| ||
| GOTO ALARM/ MOTION PAGE |
|
|
|
| MAIN PAGE |
| |
|
|
|
|
| ||||
|
|
|
|
|
|
|
|
|
MOTION SETTING
MOTION | : ON |
SENSITIVITY | : 3 |
REGION | : SET |
MAIN PAGE
3.2.4 Externally Triggered Recording
By connecting/ disconnecting RECORD IN of ALARM I/O on the rear panel of the DVR, you can activate/deactivate the recording function of a DVR. The file will be kept with a prefixed “R”.