Other Connections
STB connection to TV and Video devices (VCR, DVD recorder, etc)
e.g.: Connection to VCR
NOTE:
Audio and Video cables are not included.
A N T. I N
To audio input jacks (L, R)
DVI - D HDCP OUT
A N T.
C T L
Audio
cable VCR
|
|
| Rear panel of STB |
| ||
|
|
| D. AU D I O O U T |
|
| |
| C V B S |
|
| Y |
|
|
| O U T |
|
| C OA X . |
| |
|
|
|
|
| ||
| L |
|
| P b |
| |
| OPT |
|
| P r | RESOLUTION |
|
|
|
|
|
| SELECT |
|
| R |
|
|
|
|
|
D. AU D I O |
| 1 | 2 | C O M P. | 1 0 8 0 i / 7 2 0 p / 4 8 0 p |
|
DV I COMP. | S - V I D E O |
| ||||
O U T | AU D I O O U T | O U T | O U T |
| ||
| Audio cable |
|
| 4Other Connections | ||
|
|
|
|
| Video cable | |
|
|
|
|
|
| |
To video input 
jack
Video cable
1Refer to "Antenna Connections" to connect the STB to the Smart Antenna (or a different one if you wish).
2Use a standard audio cable to connect the AUDIO OUT jacks (L, R) on the STB to the audio input jacks (L, R) on the VCR.
NOTE:
If your VCR is monaural (MONO) and has only one audio jack, use a standard audio cable (white) to connect the AUDIO OUT jack (white) on STB to the audio input jack (white) on the VCR. The red cable and jack will not be used.
3Use a standard video cable to connect the CVBS OUT jack (Composite) on the STB to the video input jack on the VCR.
4Use a standard video cable to connect the video output jack on the VCR to the video input jack on the TV.
5Use a standard audio cable to connect the set of audio output jacks (L, R) on the VCR to the audio input jacks (L, R) on the TV.
6Plug all AC power cords into AC outlets, then turn all devices on.
7Set the TV and VCR to input mode.
Refer to your television’s or VCR’s manual for details.
NOTE:
When using this connection, the resolution of the video signal output will always be 480i.
21
EN
1A23