Sylvania 6900DTE owner manual Scan is completed, To cancel during scanning, Autoscan menu appears

Advanced Operation

1 Press SETUP to display SETUP menu.

Screen:

Remote:SETUP

QUIT

CHANNEL

DISPLAY

CLOCK

DETAIL

2 Select CHANNEL using navigation buttons o / p, then press ENTER.

•CHANNEL menu appears.

CHANNEL

QUIT	ADD/DELETE
CHANNEL	ANTENNA
DISPLAY	AUTOSCAN
CLOCK
DETAIL

3 Select AUTOSCAN using navigation buttons o / p, then press ENTER.

•AUTOSCAN menu appears.

AUTOSCAN

QUIT	AUTOSCAN
CHANNEL	EXTENDED SCAN (approx 20min)

DISPLAY

CLOCK

DETAIL

4Select AUTOSCAN or EXTENDED SCAN using navigation buttons o / p,

then press ENTER.

•The Scanning screen appears while the STB scans for available digital channels and adds them to the channel map.

To cancel during scanning:

Press SETUP or ENTER.

•AUTOSCAN CANCELLED appears on the screen.

2-1

AUTOSCAN CANCELLED

or

NOTE:

If cancelled, some channels not yet scanned may not be received. We recommend completing AUTOSCAN or EXTENDED SCAN.

5 Scan is completed.

•SETUP menu goes off automatically and STB starts receiving broadcasts.

AUTOSCAN

Now the system is scanning for channels.

100%	Channel Found
QUIT

State of the union	7-1
MONAURAL
AUTOSCAN COMPLETED

Press CH o / p buttons to verify whether STB is receiving channels being broadcast.

When NO SIGNAL appears on the screen:

AUTOSCAN

Now the system is scanning for channels.

11% Channel Found

QUIT

Autoscan

Takes about 3 minutes.

EXTENDED SCAN

Now the system is scanning for channels.

Remaining Time: 18min

11% Channel Found

QUIT

Extended scan

Takes about 20 minutes.

Verify the antenna connection, then scan again. The STB tunes in channel 2-1 and NO SIGNAL appears if the STB could not receive any channels.

2-1

NO SIGNAL

TIP:

When you want to completely reflesh the channel map, use ADD/DELETE to delete all the channels, then do the AUTOSCAN again.

See “Deleting channels” on page 36 for details.

40

EN

1A23