Sylvania 6900DTE owner manual Extended Scan

Others

Symptom	Remedy
	• Make sure to complete AUTOSCAN in SETUP WIZARD or EXTENDED
	SCAN in SETUP menu. It will be required when you setup STB for the first
	time or when STB is moved to a location where other channels are
	broadcast.
No reception	• The selected channel does not exist at that time. There are not always sub-
	channels being broadcast.
	• When AUTOSCAN is interrupted and not completed, some channels will
	not be received. Make sure to complete AUTOSCAN or EXTENDED
	SCAN in SETUP menu.
The entered channel	• Many digital channels have alternate channel numbers. STB changes the
number changes	numbers automatically to the ones signifying the broadcasting stations.
automatically
No reception of channels	• Some channels are not received with AUTOSCAN in SETUP menu. Use
with weak signal	EXTENDED SCAN for better results.
(AUTOSCAN)
When you forget the	• Unplug the AC power cord and wait for approx. 5 seconds, then enter the
password for V-CHIP	default number "0000."
Closed captioning	• Change the TV setting to a mode other than VIDEO.
display (TEXT mode)	• Change channels through the TV.
does not go off even	• Turn off the power of the TV, then turn on the power again.
after changing channels
through STB.
The screen goes blank	• This is a normal part of the start-up process and is not a malfunction.
just after turning the
STB on.
Channels without a signal	• Scanning finds new channels, but it does not delete old ones. Delete
remain after scanning	unwanted channels in ADD/DELETE in the SETUP menu.
with AUTOSCAN or
EXTENDED SCAN.

8 Others

63

EN

1A23