Sylvania 6900DTE owner manual Chip options, Setting a new password

Advanced Operation

5Use the navigation buttons o / p to select the channel you want to gather clock data from in the channel map,

then press ENTER.

•The time info window appears and the STB starts searching for the time info on the channel you selected.

CLOCK

	Select a channel for auto clock setting.
QUIT	Searching. Time info on 4CH.
CHANNEL	4	26	Searching.
DISPLAY			SET
CLOCK			CANCEL
DETAIL

TIP:

•You can select a channel that has been found even if the STB is still searching.

•When the STB has finished gathering the time information, the current date and time according to the channel appears.

•“No time info.” appears if the STB could not find time

information from the channel you selected.

CLOCK

	Select a channel for auto clock setting.
QUIT	Searching. Time info on 4CH.
CHANNEL	4	26	Sat, Jan 31, 2004
			3:00 PM
DISPLAY			SET

V-CHIP options

Setting a new password

You will need to change the 4-digit password to protect your V-CHIP/CC setting.

“0000” is the default password.

NOTE:

If the power supply is stopped due to a power failure or unplugging AC power cord for approx. 5 seconds, the password goes back to “0000.”

DO NOT forget your password.

You need it to set the V-CHIP/CC.

SETUP

Number buttons

CLOCK

DETAIL

CANCEL

ENTER

6 Use the navigation buttons o / p to select SET and press ENTER.

•The CLOCK menu appears.

•The selected channel is set, then the clock is activated.

•If the time shown is incorrect or the time isn’t shown, select CANCEL, press ENTER. Then, repeat steps [5] and [6] using another channel.

CLOCK	Sat, Jan 31, 2004 3:00PM
QUIT	DST	ON
CHANNEL	TIME ZONE	CENTRAL
DISPLAY	MANUAL
	AUTO	4CH
CLOCK
DETAIL

Navigation buttons /

7 Press SETUP to exit SETUP menu.

47

EN

1A23