Basic Operation
On screen messages
Some messages are displayed on the screen during channel changing or during programs.
NO SIGNAL
When STB cannot receive a channel signal, the whole screen becomes gray, then NO SIGNAL appears in the center.
This may occur when:
•the signal is too weak
(when using the Smart Antenna, it automatically searches for the strongest signal.)
•the channel is not broadcasting
•the antenna cable is not connected
SCANNING
When STB is trying to receive a signal, the whole screen becomes gray, then SCANNING appears in the center.
This program is protected and cannot be viewed on TV without
To watch this program, select “COMP.” by DVI/COMP. Select Switch and use video output other than DVI.
The STB receives digital broadcasts with embedded “broadcast flag” and enciphers them with the HDCP system and outputs them from the
Your television must also be
You can still view the program, by using another type of video connection. See “TV/Monitor Connections” for the alternatives and switch the output selection switch (DVI/COMP.) on back of STB to COMP.
“Broadcast flags” are digital codes embedded in digital broadcasting streams that signal the STB to limit indiscriminate redistribution of content.
RESTRICTED PROGRAM
When you have set
See “Setting MPAA rating” on page 51 or “Setting TV rating” on page 53 for further information.
Press INFO to verify the rating of a program currently being received.
Screen:
Remote: | No description provided. | Cowboy | |
|
| ENGLISH |
No description provided.
RESTRICTED PROGRAM
6 Basic Operation
The rating of this program
31
EN
1A23