Philips VRX463 warranty Remote Locator, When you find the remote control, point the remote at

Page 29

When you use the Remote Locator feature, your VCR can find your remote control. To find your remote, follow these steps.

1

Press the POWER button on the VCR to turn on the VCR. LOCATING REMOTE appears on the TV screen briefly. Within a few seconds, the remote control will start beeping. It will beep for about 30 seconds.

2

When you find the remote control, point the remote at the

VCR’s remote sensor and press any button on the remote control to stop the beeping.

The VCR may find other remote controls in your home, or even in an apartment complex. To program the VCR to find its remote control only, follow these steps.

1

Press the VCR button, then press the MENU button.

2

Press the Number 6 button to select SET REMOTE LOCA- TOR.

TO CHANGE CODE,

PUSH MUTE AND PAUSE KEY

FOR 3 SECONDS.

TO END PUSH EXIT

3

Press and hold the MUTE button and the PAUSE/STILL button at the same time for three seconds. The current remote locator code will appear on-screen.

SET LOCATOR CODE

REMOTE LOCATOR CODE IS 4

TO SELECT PUSH 0-9

4

Press one Number button (0 - 9) on the remote control to set a new locator code. (If you press any other button, the code won’t be set.) The remote control will beep briefly, indicat- ing that the locator code has been changed successfully. The new code will appear in the menu, then the menu will disappear.

SET LOCATOR CODE

REMOTE LOCATOR CODE

HAS BEEN CHANGED

NEW CODE IS 6

Remote Locator 29

To program the VCR to find its

remote control only....

	CBL/DSS	VCR	TV	1
3	PAUSE/STILL	POWER	MUTE
	REW	PLAY	FF
	REW		FF
	EJECT	STOP	F.ADV
		STOP
	VCR PLUS+/ENTER
	EXIT/STATUS		CLEAR
		MENU
	JOG/SHUTTLE
	VOL		CHANNEL
			CHANNEL

4	1	2	3	2
4	7	8	9	2
	4	5	6
	100	0	GO-TO

REC /OTR	INDEX	MEMO
	VAR.
	SLOW
SPEED	VCR/TV SLOW	TRACKING SKIP

SEARCH

REMOTE LOCATOR

Helpful Hints

•The VCR may not find the remote control if the remote is placed on a metal shelf or on counter material.

•Any changes or modifications to the remote control not expressly approved by Philips Consumer Electronics Company could void the user’s authority to operate the remote control.

•If you change the remote locator code in the steps above, you must reprogram the remote control when you replace the batteries.

Image 29

Contents Video Cassette Recorder VRX463 For Customer Use Dear Philips Magnavox product ownerIntroduction FeaturesSafety Precautions Table of Contents Putting Batteries in the Remote Control Before Using Your VCRUsing the Remote Control VCR MaintenanceDisconnect the antenna or cable from your TV Hookups Without a Cable BoxAntenna Or Cable Hookups Without a Cable Box cont’dHookups With a Cable Box/DSS Receiver Timer RecordingsRecording or Viewing a Scrambled or Unscrambled Channel Watching TV With the VCR Turned OffRecording One Channel/Watching Another Hookups With a Cable Box/DSS Receiver cont’dPlaying a Tape Antenna in Jack On back of TVTurning on Your VCR Press the VCR button, then press the Power buttonVCR will come on Turn on the TVWait for the VCR to program channels Press the Menu button. The menu shown below will appearProgramming Channels Press the Number 3 button to select Tuner SET UPPress the VCR button, then press the Menu button to Bring up the main menu displayPress the VCR button Adding/Deleting ChannelsPress the Menu button to bring up the main menu display Press the Number 4 button to select ADD/DELETE CHPress the VCR button, then press the Menu button Setting the ClockPress the Number 3 button to select SET Manual Clock Press the EXIT/STATUS buttonPress the Number 4 button to select SET Time Zone Setting the Clock cont’dTime Zone Selection Manual PBS Channel Selection Automatic PBS Channel Selection Setting the Clock cont’dPress the EXIT/STATUS button to exit Daylight-Saving Time SelectionLanguage Selection Press the Number 2 button to select VCR SET UPLanguage Selection Press the Number 3 button to select LanguageRemote Control Buttons Stop Button REWind ButtonEject Button JOG/SHUTTLE ButtonDisplay Panel OTR Light Display Panel cont’dRemote Sensor Tape Speed Lights Memory LightFront Panel Rear Panel 2Find the code for your TV 4Repeat step Setting the Remote Control to Operate a TVFind the code for your Cable Box/DSS Receiver Repeat step Cable BOX/DSS Receiver CodesOn-Screen Status Displays Press the Number 2 button to select on Screen ModeCounter will remain on the screen Sound ProgramRemote Locator When you find the remote control, point the remote at1Turn on the TV 2Insert a tape PlayingRead and follow the steps below to play a tape Appear on the display panel RecordingStopping an OTR One Touch RecordingStarting an OTR Recording One Channel/Watching Another Press the Number 1 button to select Program Timer RecordingSelect a once, daily, or weekly recording RecordingFollow to set the recording’s stop time Instructions continue onBox/DSS Receiver on Tape Speeds Timer Recording cont’dChecking or Clearing Timer Recordings Local TV Stations Call letters Setting Up the VCR Plus+ Programming SystemTV Channels Cable Channels Setting Up the VCR Plus+ Programming System cont’d Timer Recording With the VCR Plus+ Programming System Press the EXIT/STATUS button. Program WAS COM Cable Box or DSS Receiver Controller Connecting the ControllerPress the Number 5 button to select SET Cable BOX Setting the Controller to Operate a Cable BoxPress the Menu button. Wait for a few seconds Ton. When the Cable Box changes to channel 09, go to stepNumber 2 button to select NO. Use the Number buttons to Press the Menu button or the EXIT/STATUS buttonController to on Press the Number 6 button to select SET DSS ReceiverPress the Number 1 button to set the DSS Receiver Press the Number 1 button to select YES Press the Menu buttonAudio cables Rerecording Tape DuplicationVideo cable VCR 1 will play your tape. Insert a prerecorded tape in VCRInsert a tape Index SearchReceiving a Second Audio Program Multi-Channel Television Sound SystemReceiving a Stereo Broadcast Press the Number 1 button so that on appears beside Multi-Channel Television Sound System cont’dHi-Fi Stereo Tape Playback Tape Counter Memory Using the Tape CounterBegin tape playback To bring up the Goto displayStop the tape Turn off VCRRepeat Playback Video Stabilizer Video StabilizerForward and Reverse Searching Playback OptionsViewing a Still Picture Viewing a Slow Motion PictureAutomatic Operation Features Cable Box/DSS Receiver Output Channel channel 03 or GlossarySpecifications Helpful Hints Helpful Hints cont’d Renewed Index Supplied Accessories