Philips VRX463 warranty Recording, Appear on the display panel

Page 31

Read and follow the steps below to record a television program.

1

Turn on the TV and set it to channel 3 or 4, whichever the CH3/CH4 switch on the back of the VCR is set to.

2

Insert a tape with its record tab intact (details are on page five) in the VCR. The power will come on.

3

Press the VCR button.

4

If the VCR light appears on the display panel of the VCR, go to step 5. If the VCR light does not appear, press the VCR/TV button once.

5

Press the (Tape) SPEED button until the desired tape speed appears on-screen. The VCR will only record in SP or SLP. Details about tape speed are on pages 36 and 58.

6

Use the CHANNEL Up/Down buttons or the Number buttons to select the channel to be recorded.

7

Press the REC(ord)/OTR button to start recording. The REC(ord) light will appear on the VCR display panel.

If the REC(ord)/OTR button is pressed while no tape is in the VCR, NO CASSETTE will appear on-screen for five seconds.

8

To pause the recording (for example, during commer- cials), press the PAUSE/STILL button. The PAUSE light will

appear on the display panel.

To resume recording, press the PAUSE/STILL button again. The PAUSE light will disappear from the display panel.

9

Press the STOP button to stop recording. The REC(ord) light will disappear from the display panel.

Recording 31

1Turn on the TV.

2Insert a tape.

3	CBL/DSS	VCR	TV
8	PAUSE/STILL	POWER	MUTE
	REW	PLAY	FF
9	REW		FF
	EJECT	STOP	F.ADV
		STOP
	VCR PLUS+/ENTER
	EXIT/STATUS		CLEAR
		MENU		6
	JOG/SHUTTLE			6
	VOL		CHANNEL
			CHANNEL

	1	2	3
	4	5	6
7	7	8	9
	100	0	GO-TO
	REC /OTR	INDEX	MEMO
5		VAR.			4
		SLOW
	SPEED VCR/TV SLOW		TRACKING	SKIP
			SEARCH
		REMOTE LOCATOR

Helpful Hints

•If the REC(ord)/OTR button is pressed while a tape without a record tab is in the VCR, PROTECT-

ED CASSETTE CANNOT RECORD will appear on-screen briefly. The VCR will eject the tape.

•You can change the tape speed while recording, but some distortion will appear on the tape.

•The VCR records in a preset volume.

•If the end of the tape is reached while recording, the VCR will stop recording, rewind the tape, then

stop. Details are on page 57.

Image 31

Contents Video Cassette Recorder VRX463 For Customer Use Dear Philips Magnavox product ownerSafety Precautions FeaturesIntroduction Table of Contents VCR Maintenance Before Using Your VCRPutting Batteries in the Remote Control Using the Remote ControlDisconnect the antenna or cable from your TV Hookups Without a Cable BoxAntenna Or Cable Hookups Without a Cable Box cont’dWatching TV With the VCR Turned Off Timer RecordingsHookups With a Cable Box/DSS Receiver Recording or Viewing a Scrambled or Unscrambled ChannelAntenna in Jack On back of TV Hookups With a Cable Box/DSS Receiver cont’dRecording One Channel/Watching Another Playing a TapeTurn on the TV Press the VCR button, then press the Power buttonTurning on Your VCR VCR will come onWait for the VCR to program channels Press the Menu button. The menu shown below will appearBring up the main menu display Press the Number 3 button to select Tuner SET UPProgramming Channels Press the VCR button, then press the Menu button toPress the Number 4 button to select ADD/DELETE CH Adding/Deleting ChannelsPress the VCR button Press the Menu button to bring up the main menu displayPress the EXIT/STATUS button Setting the ClockPress the VCR button, then press the Menu button Press the Number 3 button to select SET Manual ClockTime Zone Selection Setting the Clock cont’dPress the Number 4 button to select SET Time Zone Manual PBS Channel Selection Automatic PBS Channel Selection Setting the Clock cont’dPress the EXIT/STATUS button to exit Daylight-Saving Time SelectionPress the Number 3 button to select Language Press the Number 2 button to select VCR SET UPLanguage Selection Language SelectionRemote Control Buttons JOG/SHUTTLE Button REWind ButtonStop Button Eject ButtonDisplay Panel Tape Speed Lights Memory Light Display Panel cont’dOTR Light Remote SensorFront Panel Rear Panel 2Find the code for your TV 4Repeat step Setting the Remote Control to Operate a TVFind the code for your Cable Box/DSS Receiver Repeat step Cable BOX/DSS Receiver CodesSound Program Press the Number 2 button to select on Screen ModeOn-Screen Status Displays Counter will remain on the screenRemote Locator When you find the remote control, point the remote atRead and follow the steps below to play a tape Playing1Turn on the TV 2Insert a tape Appear on the display panel RecordingStarting an OTR One Touch RecordingStopping an OTR Recording One Channel/Watching Another Recording Timer RecordingPress the Number 1 button to select Program Select a once, daily, or weekly recordingBox/DSS Receiver on Instructions continue onFollow to set the recording’s stop time Tape Speeds Timer Recording cont’dChecking or Clearing Timer Recordings TV Channels Cable Channels Setting Up the VCR Plus+ Programming SystemLocal TV Stations Call letters Setting Up the VCR Plus+ Programming System cont’d Timer Recording With the VCR Plus+ Programming System Press the EXIT/STATUS button. Program WAS COM Cable Box or DSS Receiver Controller Connecting the ControllerPress the Number 5 button to select SET Cable BOX Setting the Controller to Operate a Cable BoxPress the Menu button or the EXIT/STATUS button Ton. When the Cable Box changes to channel 09, go to stepPress the Menu button. Wait for a few seconds Number 2 button to select NO. Use the Number buttons toPress the Number 1 button to set the DSS Receiver Press the Number 6 button to select SET DSS ReceiverController to on Press the Number 1 button to select YES Press the Menu buttonVCR 1 will play your tape. Insert a prerecorded tape in VCR Rerecording Tape DuplicationAudio cables Video cableInsert a tape Index SearchReceiving a Stereo Broadcast Multi-Channel Television Sound SystemReceiving a Second Audio Program Press the Number 1 button so that on appears beside Multi-Channel Television Sound System cont’dHi-Fi Stereo Tape Playback Tape Counter Memory Using the Tape CounterTurn off VCR To bring up the Goto displayBegin tape playback Stop the tapeRepeat Playback Video Stabilizer Video StabilizerViewing a Slow Motion Picture Playback OptionsForward and Reverse Searching Viewing a Still PictureAutomatic Operation Features Cable Box/DSS Receiver Output Channel channel 03 or GlossarySpecifications Helpful Hints Helpful Hints cont’d Renewed Index Supplied Accessories