Philips VRX463 warranty Hookups With a Cable Box/DSS Receiver cont’d, Playing a Tape

Page 9

Hookups With a Cable Box/DSS Receiver (cont’d) 9

This connection allows you to program an unattended recording of more than one unscram- bled channel and to watch one channel while recording another. After you connect the VCR, Cable Box/DSS Receiver, and TV as shown below, the features on this page will be available.

1.Connect a Cable signal to the VCR’s

ANT(enna) IN Jack.

CABLE

BOX IN OUT ANT.IN

R

AUDIO

L

RF OUT

VIDEO

CH3 CH4

2. Use an RF coaxial cable (supplied) to connect the RF OUT Jack on the VCR to the IN Jack on the Cable Box/DSS Receiver.

3. Use a second RF coaxial cable to con-
nect the OUT Jack on the Cable Box/DSS
Receiver to the TV’s ANTENNA IN Jack.	7	5V
	ANT
	EN
	IN		NA
	IN
IN
OUT

ANTENNA IN Jack

(on back of TV)

Recording One Channel/Watching Another

1

Put the Cable Box/DSS Receiver on the same channel as the VCR’s CH3/CH4 switch. Put the TV on the Cable Box output channel (03 or 04).

With the VCR in VCR position (the VCR light will appear on the display panel), use the CHANNEL Up/Down buttons at the VCR to select the channel you want to record. Start the recording.

2

Press the VCR/TV button once to put the VCR in TV position. (The VCR light will disappear.)

3

Use the CHANNEL Up/Down buttons on the TV to set the TV to the Cable Box/DSS Receiver output channel (03 or 04).

4

Use the CHANNEL Up/Down buttons on the Cable Box/DSS Receiver to select the channel you want to watch.

Playing a Tape

1

Press the VCR/TV button to put the VCR in VCR position (the VCR light will appear on the display panel).

2

Make sure the Cable Box/DSS Receiver is on the same channel as the VCR’s CH3/CH4 switch.

3

Use the CHANNEL Up/Down buttons at the TV to set the TV to the Cable Box output channel (03 or 04).

4

Press the PLAY button to play the tape.

Helpful Hints

•You cannot record scrambled chan- nels with this connection.

•This connection may not work with your cable system. You may have to use the connection shown on page eight.

•To return to the channel being recorded, use the CHANNEL Up/Down buttons at the Cable Box to set the Cable Box to the same channel as the CH3/CH4 switch. Then, press the VCR/TV button to put the VCR in VCR position.

Image 9

Contents Video Cassette Recorder VRX463 For Customer Use Dear Philips Magnavox product ownerFeatures Safety PrecautionsIntroduction Table of Contents Putting Batteries in the Remote Control Before Using Your VCRUsing the Remote Control VCR MaintenanceDisconnect the antenna or cable from your TV Hookups Without a Cable BoxAntenna Or Cable Hookups Without a Cable Box cont’dHookups With a Cable Box/DSS Receiver Timer RecordingsRecording or Viewing a Scrambled or Unscrambled Channel Watching TV With the VCR Turned OffRecording One Channel/Watching Another Hookups With a Cable Box/DSS Receiver cont’dPlaying a Tape Antenna in Jack On back of TVTurning on Your VCR Press the VCR button, then press the Power buttonVCR will come on Turn on the TVWait for the VCR to program channels Press the Menu button. The menu shown below will appearProgramming Channels Press the Number 3 button to select Tuner SET UPPress the VCR button, then press the Menu button to Bring up the main menu displayPress the VCR button Adding/Deleting ChannelsPress the Menu button to bring up the main menu display Press the Number 4 button to select ADD/DELETE CHPress the VCR button, then press the Menu button Setting the ClockPress the Number 3 button to select SET Manual Clock Press the EXIT/STATUS buttonSetting the Clock cont’d Time Zone SelectionPress the Number 4 button to select SET Time Zone Manual PBS Channel Selection Automatic PBS Channel Selection Setting the Clock cont’dPress the EXIT/STATUS button to exit Daylight-Saving Time SelectionLanguage Selection Press the Number 2 button to select VCR SET UPLanguage Selection Press the Number 3 button to select LanguageRemote Control Buttons Stop Button REWind ButtonEject Button JOG/SHUTTLE ButtonDisplay Panel OTR Light Display Panel cont’dRemote Sensor Tape Speed Lights Memory LightFront Panel Rear Panel 2Find the code for your TV 4Repeat step Setting the Remote Control to Operate a TVFind the code for your Cable Box/DSS Receiver Repeat step Cable BOX/DSS Receiver CodesOn-Screen Status Displays Press the Number 2 button to select on Screen ModeCounter will remain on the screen Sound ProgramRemote Locator When you find the remote control, point the remote atPlaying Read and follow the steps below to play a tape1Turn on the TV 2Insert a tape Appear on the display panel RecordingOne Touch Recording Starting an OTRStopping an OTR Recording One Channel/Watching Another Press the Number 1 button to select Program Timer RecordingSelect a once, daily, or weekly recording RecordingInstructions continue on Box/DSS Receiver onFollow to set the recording’s stop time Tape Speeds Timer Recording cont’dChecking or Clearing Timer Recordings Setting Up the VCR Plus+ Programming System TV Channels Cable ChannelsLocal TV Stations Call letters Setting Up the VCR Plus+ Programming System cont’d Timer Recording With the VCR Plus+ Programming System Press the EXIT/STATUS button. Program WAS COM Cable Box or DSS Receiver Controller Connecting the ControllerPress the Number 5 button to select SET Cable BOX Setting the Controller to Operate a Cable BoxPress the Menu button. Wait for a few seconds Ton. When the Cable Box changes to channel 09, go to stepNumber 2 button to select NO. Use the Number buttons to Press the Menu button or the EXIT/STATUS buttonPress the Number 6 button to select SET DSS Receiver Press the Number 1 button to set the DSS ReceiverController to on Press the Number 1 button to select YES Press the Menu buttonAudio cables Rerecording Tape DuplicationVideo cable VCR 1 will play your tape. Insert a prerecorded tape in VCRInsert a tape Index SearchMulti-Channel Television Sound System Receiving a Stereo BroadcastReceiving a Second Audio Program Press the Number 1 button so that on appears beside Multi-Channel Television Sound System cont’dHi-Fi Stereo Tape Playback Tape Counter Memory Using the Tape CounterBegin tape playback To bring up the Goto displayStop the tape Turn off VCRRepeat Playback Video Stabilizer Video StabilizerForward and Reverse Searching Playback OptionsViewing a Still Picture Viewing a Slow Motion PictureAutomatic Operation Features Cable Box/DSS Receiver Output Channel channel 03 or GlossarySpecifications Helpful Hints Helpful Hints cont’d Renewed Index Supplied Accessories