Philips VRX463 warranty One Touch Recording, Starting an OTR, Stopping an OTR

Page 32

32 One Touch Recording

The one touch recording (OTR) function allows you to start an immediate timed recording 30 minutes to nine hours long of the channel you are watching. Before you begin, make sure:

•Channels are programmed. Details are on page 12.

•The desired recording speed (SP or SLP) has been selected with the (Tape) SPEED button. Details are on pages 36 and 58.

•There is a tape in the VCR. Make sure the tape’s record tab is intact (see page five) and the tape is long enough to record the program(s). If the end of the tape is reached during an OTR, recording will stop. The VCR will eject the tape and turn itself off.

•The VCR is in VCR position. (The VCR light will appear on the display panel of the VCR when the VCR is in VCR position. If the VCR light does not appear, press the VCR/TV button once.)

CBL/DSS	VCR	TV	1
PAUSE/STILL	POWER	MUTE
REW	PLAY	FF
REW		FF

EJECTF.ADV

STOP

VCR PLUS+/ENTER

EXIT/STATUSCLEAR

MENU

Starting an OTR

VOL

1

JOG/SHUTTLE

CHANNEL

2

Press the VCR button.

2

Use the CHANNEL Up/Down buttons or the Number buttons to select the channel you want to record.

3

1 2 3

4 5 6

7 8 9

Press the REC(ord)/OTR button 2 - 19 times, until the

	desired recording length (30 minutes to nine hours) appears in the	100	0	GO-TO
		REC /OTR	INDEX	MEMO
	upper left corner of the screen and on the display panel briefly.	REC /OTR	INDEX	MEMO
			VAR.
	The OTR light will flash on the display panel; the REC(ord) light		SLOW
		3 SPEED VCR/TV SLOW		TRACKING SKIP
	will appear on the display panel.			SEARCH

OTR (0:30)

REMOTE LOCATOR

CH 12

SLP

Stopping an OTR

To stop an OTR before recording is finished, press the STOP but- ton.

To cancel the OTR but continue recording, press the REC(ord)/OTR button until REC appears in the upper left corner of the TV screen. The REC(ord) light will remain on the display panel, but the OTR light will disappear.

Helpful Hints

•To check the time remaining for an OTR after the OTR is in progress, press the EXIT/STATUS button.

•To change the recording length while an OTR is in progress, press the REC(ord)/OTR button until the desired length appears on-screen.

•If the preset time for a timer recording comes up during an OTR, the OTR has priority.

•You may not be able to access the menu during an OTR.

Image 32

Contents Video Cassette Recorder VRX463 Dear Philips Magnavox product owner For Customer UseIntroduction FeaturesSafety Precautions Table of Contents Before Using Your VCR Putting Batteries in the Remote ControlUsing the Remote Control VCR MaintenanceHookups Without a Cable Box Disconnect the antenna or cable from your TVHookups Without a Cable Box cont’d Antenna Or CableTimer Recordings Hookups With a Cable Box/DSS ReceiverRecording or Viewing a Scrambled or Unscrambled Channel Watching TV With the VCR Turned OffHookups With a Cable Box/DSS Receiver cont’d Recording One Channel/Watching AnotherPlaying a Tape Antenna in Jack On back of TVPress the VCR button, then press the Power button Turning on Your VCRVCR will come on Turn on the TVPress the Menu button. The menu shown below will appear Wait for the VCR to program channelsPress the Number 3 button to select Tuner SET UP Programming ChannelsPress the VCR button, then press the Menu button to Bring up the main menu displayAdding/Deleting Channels Press the VCR buttonPress the Menu button to bring up the main menu display Press the Number 4 button to select ADD/DELETE CHSetting the Clock Press the VCR button, then press the Menu buttonPress the Number 3 button to select SET Manual Clock Press the EXIT/STATUS buttonPress the Number 4 button to select SET Time Zone Setting the Clock cont’dTime Zone Selection Manual PBS Channel Selection Setting the Clock cont’d Automatic PBS Channel SelectionDaylight-Saving Time Selection Press the EXIT/STATUS button to exitPress the Number 2 button to select VCR SET UP Language SelectionLanguage Selection Press the Number 3 button to select LanguageRemote Control Buttons REWind Button Stop ButtonEject Button JOG/SHUTTLE ButtonDisplay Panel Display Panel cont’d OTR LightRemote Sensor Tape Speed Lights Memory LightFront Panel Rear Panel Setting the Remote Control to Operate a TV 2Find the code for your TV 4Repeat stepCable BOX/DSS Receiver Codes Find the code for your Cable Box/DSS Receiver Repeat stepPress the Number 2 button to select on Screen Mode On-Screen Status DisplaysCounter will remain on the screen Sound Program When you find the remote control, point the remote at Remote Locator1Turn on the TV 2Insert a tape PlayingRead and follow the steps below to play a tape Recording Appear on the display panelStopping an OTR One Touch RecordingStarting an OTR Recording One Channel/Watching Another Timer Recording Press the Number 1 button to select ProgramSelect a once, daily, or weekly recording RecordingFollow to set the recording’s stop time Instructions continue onBox/DSS Receiver on Timer Recording cont’d Tape SpeedsChecking or Clearing Timer Recordings Local TV Stations Call letters Setting Up the VCR Plus+ Programming SystemTV Channels Cable Channels Setting Up the VCR Plus+ Programming System cont’d Timer Recording With the VCR Plus+ Programming System Press the EXIT/STATUS button. Program WAS COM Connecting the Controller Cable Box or DSS Receiver ControllerSetting the Controller to Operate a Cable Box Press the Number 5 button to select SET Cable BOXTon. When the Cable Box changes to channel 09, go to step Press the Menu button. Wait for a few secondsNumber 2 button to select NO. Use the Number buttons to Press the Menu button or the EXIT/STATUS buttonController to on Press the Number 6 button to select SET DSS ReceiverPress the Number 1 button to set the DSS Receiver Press the Menu button Press the Number 1 button to select YESRerecording Tape Duplication Audio cablesVideo cable VCR 1 will play your tape. Insert a prerecorded tape in VCRIndex Search Insert a tapeReceiving a Second Audio Program Multi-Channel Television Sound SystemReceiving a Stereo Broadcast Multi-Channel Television Sound System cont’d Press the Number 1 button so that on appears besideHi-Fi Stereo Tape Playback Using the Tape Counter Tape Counter MemoryTo bring up the Goto display Begin tape playbackStop the tape Turn off VCRRepeat Playback Video Stabilizer Video StabilizerPlayback Options Forward and Reverse SearchingViewing a Still Picture Viewing a Slow Motion PictureAutomatic Operation Features Glossary Cable Box/DSS Receiver Output Channel channel 03 orSpecifications Helpful Hints Helpful Hints cont’d Renewed Index Supplied Accessories