Philips VRX463 To bring up the Goto display, Begin tape playback, Stop the tape, Turn off VCR

Page 53

Follow the steps below to program the VCR to go to a place on a tape with a specified tape counter location number.

•Make sure the VCR is in VCR position. (The VCR light will appear on the display panel. If it does not, press the VCR/TV button once.)

1

Press the VCR button.

2

When tape playback is stopped, press the GO-TO button

to bring up the GOTO display.

NOW	1:	00 : 00
GOTO	–:	– – : – –

3

Within 10 seconds, use the Number buttons to enter the desired tape counter location number. For example, to go to tape counter location number 1:20:00, press Number buttons 1, 20, 00.

NOTE: If the desired tape counter location number has a minus (–) before it, enter the minus by pressing the CHANNEL Down button. Press the CHANNEL Up button to remove the minus.

NOW	1: 00 : 00
GOTO	1: 20 : 00

4

Within 10 seconds, press the PLAY, STOP, POWER, or REC(ord)/OTR button. The VCR will fast forward or rewind the tape to the selected tape counter location. Then, depending on which button you pressed, the VCR will either begin tape play- back, stop the tape, turn itself off, or start recording the current channel.

Button pressed	VCR action
PLAY	Begin tape playback
STOP	Stop the tape
POWER	Turn off VCR
REC(ord)/OTR	Begin recording current channel

Go-To Feature 53

		1
	CBL/DSS		VCR	TV
4	PAUSE/STILL		POWER	MUTE
	REW		PLAY	FF
	REW			FF
	EJECT		STOP	F.ADV
			STOP
		VCR PLUS+/ENTER
	EXIT/STATUS			CLEAR
			MENU
	VOL	JOG/SHUTTLE
	VOL			CHANNEL
				CHANNEL
	1		2	3	3
	4		5	6
	7		8	9
	7		8	9	2
	100		0	GO-TO
	REC /OTR	INDEX		MEMO
		VAR.
		SLOW

SPEED VCR/TV SLOW TRACKING SKIP

SEARCH

REMOTE LOCATOR

Helpful Hints

•To remove the GOTO display, press the GO-TO button again.

•The tape counter location number you enter at step 3 must be valid.

•To stop the tape during rewinding or fast forwarding (before the tape reaches the requested tape counter location number), press the STOP button.

Image 53

Contents Video Cassette Recorder VRX463 For Customer Use Dear Philips Magnavox product ownerIntroduction FeaturesSafety Precautions Table of Contents Putting Batteries in the Remote Control Before Using Your VCRUsing the Remote Control VCR MaintenanceDisconnect the antenna or cable from your TV Hookups Without a Cable BoxAntenna Or Cable Hookups Without a Cable Box cont’dHookups With a Cable Box/DSS Receiver Timer RecordingsRecording or Viewing a Scrambled or Unscrambled Channel Watching TV With the VCR Turned OffRecording One Channel/Watching Another Hookups With a Cable Box/DSS Receiver cont’dPlaying a Tape Antenna in Jack On back of TVTurning on Your VCR Press the VCR button, then press the Power buttonVCR will come on Turn on the TVWait for the VCR to program channels Press the Menu button. The menu shown below will appearProgramming Channels Press the Number 3 button to select Tuner SET UPPress the VCR button, then press the Menu button to Bring up the main menu displayPress the VCR button Adding/Deleting ChannelsPress the Menu button to bring up the main menu display Press the Number 4 button to select ADD/DELETE CHPress the VCR button, then press the Menu button Setting the ClockPress the Number 3 button to select SET Manual Clock Press the EXIT/STATUS buttonPress the Number 4 button to select SET Time Zone Setting the Clock cont’dTime Zone Selection Manual PBS Channel Selection Automatic PBS Channel Selection Setting the Clock cont’dPress the EXIT/STATUS button to exit Daylight-Saving Time SelectionLanguage Selection Press the Number 2 button to select VCR SET UPLanguage Selection Press the Number 3 button to select LanguageRemote Control Buttons Stop Button REWind ButtonEject Button JOG/SHUTTLE ButtonDisplay Panel OTR Light Display Panel cont’dRemote Sensor Tape Speed Lights Memory LightFront Panel Rear Panel 2Find the code for your TV 4Repeat step Setting the Remote Control to Operate a TVFind the code for your Cable Box/DSS Receiver Repeat step Cable BOX/DSS Receiver CodesOn-Screen Status Displays Press the Number 2 button to select on Screen ModeCounter will remain on the screen Sound ProgramRemote Locator When you find the remote control, point the remote at1Turn on the TV 2Insert a tape PlayingRead and follow the steps below to play a tape Appear on the display panel RecordingStopping an OTR One Touch RecordingStarting an OTR Recording One Channel/Watching Another Press the Number 1 button to select Program Timer RecordingSelect a once, daily, or weekly recording RecordingFollow to set the recording’s stop time Instructions continue onBox/DSS Receiver on Tape Speeds Timer Recording cont’dChecking or Clearing Timer Recordings Local TV Stations Call letters Setting Up the VCR Plus+ Programming SystemTV Channels Cable Channels Setting Up the VCR Plus+ Programming System cont’d Timer Recording With the VCR Plus+ Programming System Press the EXIT/STATUS button. Program WAS COM Cable Box or DSS Receiver Controller Connecting the ControllerPress the Number 5 button to select SET Cable BOX Setting the Controller to Operate a Cable BoxPress the Menu button. Wait for a few seconds Ton. When the Cable Box changes to channel 09, go to stepNumber 2 button to select NO. Use the Number buttons to Press the Menu button or the EXIT/STATUS buttonController to on Press the Number 6 button to select SET DSS ReceiverPress the Number 1 button to set the DSS Receiver Press the Number 1 button to select YES Press the Menu buttonAudio cables Rerecording Tape DuplicationVideo cable VCR 1 will play your tape. Insert a prerecorded tape in VCRInsert a tape Index SearchReceiving a Second Audio Program Multi-Channel Television Sound SystemReceiving a Stereo Broadcast Press the Number 1 button so that on appears beside Multi-Channel Television Sound System cont’dHi-Fi Stereo Tape Playback Tape Counter Memory Using the Tape CounterBegin tape playback To bring up the Goto displayStop the tape Turn off VCRRepeat Playback Video Stabilizer Video StabilizerForward and Reverse Searching Playback OptionsViewing a Still Picture Viewing a Slow Motion PictureAutomatic Operation Features Cable Box/DSS Receiver Output Channel channel 03 or GlossarySpecifications Helpful Hints Helpful Hints cont’d Renewed Index Supplied Accessories