Philips VRX463 warranty Timer Recording With the VCR Plus+ Programming System

Page 40

40 Timer Recording With the VCR Plus+ Programming System

Follow the steps below to program a timer recording using PlusCode programming numbers. Before you begin make sure:

•Channels are programmed. Details are on page 12.

•The clock is set. Details are on pages 14 - 17.

•There is a tape in the VCR. Make sure the tape’s record tab is intact and the tape is long enough to record the program(s).

•The VCR is in VCR position (the VCR light will appear on the display panel of the VCR). If the VCR light does not appear, press the VCR/TV button once.

•You have programmed the VCR+ and Cable/TV channel num- bers. Details are on pages 38 - 39.

Complete each step within 60 seconds of completing the previous step. If you don’t, you may start again at step 1.

1

Press the VCR button.

2

Press the VCR PLUS+/ENTER button. The on-screen display shown below will appear.

VCR PLUS+ PROG.

VCR PLUS +

TO END PUSH EXIT

3

Use the Number buttons to enter the PlusCode program- ming number of the program you wish to record. (This number is different for every program, and it can be four to eight digits long.) Finally, press the VCR PLUS+/ENTER button.

2

3

1

CBL/DSS	VCR	TV
PAUSE/STILL	POWER	MUTE

PLAY

REWFF

EJECTF.ADV

STOP

VCR PLUS+/ENTER

EXIT/STATUSCLEAR

		MENU
	VOL	JOG/SHUTTLE
	VOL	CHANNEL
		CHANNEL

1 2 3 4

4 5 6

7 8 9

100 0 GO-TO

REC /OTR

INDEX

MEMO

VAR.

SLOW

SPEED VCR/TV SLOW TRACKING SKIP

SEARCH

REMOTE LOCATOR

VCR PLUS+ PROG.

VCR PLUS+ 13285

TO SET PUSH VCR+

TO CORRECT PUSH CLEAR

TO END PUSH EXIT

4

Select a ONCE, DAILY, or WEEKLY recording.

To record the program one time, press the Number 1 button to select ONCE. To record the same program every day from Monday through Friday, press the Number 2 button to select DAILY. To record the same program every week on the same day (such as every Saturday), press the Number 3 button to select

WEEKLY.

VCR PLUS+ PROG.

1ONCE

2DAILY

3WEEKLY

TO SELECT PUSH NO. SHOWN

TO END PUSH EXIT

Helpful Hints

•If you enter an incorrect PlusCode programming number at step 3, ERROR will appear briefly, then the previous menu will appear. Enter the correct PlusCode programming number.

•If ERROR appears at step 4 when you select DAILY, the PlusCode pro- gramming number you entered is for a program that is broadcast on Saturday or Sunday. The program cannot be recorded repeatedly from Monday through Friday.

Image 40

Contents Video Cassette Recorder VRX463 Dear Philips Magnavox product owner For Customer UseSafety Precautions FeaturesIntroduction Table of Contents Before Using Your VCR Putting Batteries in the Remote ControlUsing the Remote Control VCR MaintenanceHookups Without a Cable Box Disconnect the antenna or cable from your TVHookups Without a Cable Box cont’d Antenna Or CableTimer Recordings Hookups With a Cable Box/DSS ReceiverRecording or Viewing a Scrambled or Unscrambled Channel Watching TV With the VCR Turned OffHookups With a Cable Box/DSS Receiver cont’d Recording One Channel/Watching AnotherPlaying a Tape Antenna in Jack On back of TVPress the VCR button, then press the Power button Turning on Your VCRVCR will come on Turn on the TVPress the Menu button. The menu shown below will appear Wait for the VCR to program channelsPress the Number 3 button to select Tuner SET UP Programming ChannelsPress the VCR button, then press the Menu button to Bring up the main menu displayAdding/Deleting Channels Press the VCR buttonPress the Menu button to bring up the main menu display Press the Number 4 button to select ADD/DELETE CHSetting the Clock Press the VCR button, then press the Menu buttonPress the Number 3 button to select SET Manual Clock Press the EXIT/STATUS buttonTime Zone Selection Setting the Clock cont’dPress the Number 4 button to select SET Time Zone Manual PBS Channel Selection Setting the Clock cont’d Automatic PBS Channel SelectionDaylight-Saving Time Selection Press the EXIT/STATUS button to exitPress the Number 2 button to select VCR SET UP Language SelectionLanguage Selection Press the Number 3 button to select LanguageRemote Control Buttons REWind Button Stop ButtonEject Button JOG/SHUTTLE ButtonDisplay Panel Display Panel cont’d OTR LightRemote Sensor Tape Speed Lights Memory LightFront Panel Rear Panel Setting the Remote Control to Operate a TV 2Find the code for your TV 4Repeat stepCable BOX/DSS Receiver Codes Find the code for your Cable Box/DSS Receiver Repeat stepPress the Number 2 button to select on Screen Mode On-Screen Status DisplaysCounter will remain on the screen Sound ProgramWhen you find the remote control, point the remote at Remote LocatorRead and follow the steps below to play a tape Playing1Turn on the TV 2Insert a tape Recording Appear on the display panelStarting an OTR One Touch RecordingStopping an OTR Recording One Channel/Watching Another Timer Recording Press the Number 1 button to select ProgramSelect a once, daily, or weekly recording RecordingBox/DSS Receiver on Instructions continue onFollow to set the recording’s stop time Timer Recording cont’d Tape SpeedsChecking or Clearing Timer Recordings TV Channels Cable Channels Setting Up the VCR Plus+ Programming SystemLocal TV Stations Call letters Setting Up the VCR Plus+ Programming System cont’d Timer Recording With the VCR Plus+ Programming System Press the EXIT/STATUS button. Program WAS COM Connecting the Controller Cable Box or DSS Receiver ControllerSetting the Controller to Operate a Cable Box Press the Number 5 button to select SET Cable BOXTon. When the Cable Box changes to channel 09, go to step Press the Menu button. Wait for a few secondsNumber 2 button to select NO. Use the Number buttons to Press the Menu button or the EXIT/STATUS buttonPress the Number 1 button to set the DSS Receiver Press the Number 6 button to select SET DSS ReceiverController to on Press the Menu button Press the Number 1 button to select YESRerecording Tape Duplication Audio cablesVideo cable VCR 1 will play your tape. Insert a prerecorded tape in VCRIndex Search Insert a tapeReceiving a Stereo Broadcast Multi-Channel Television Sound SystemReceiving a Second Audio Program Multi-Channel Television Sound System cont’d Press the Number 1 button so that on appears besideHi-Fi Stereo Tape Playback Using the Tape Counter Tape Counter MemoryTo bring up the Goto display Begin tape playbackStop the tape Turn off VCRRepeat Playback Video Stabilizer Video StabilizerPlayback Options Forward and Reverse SearchingViewing a Still Picture Viewing a Slow Motion PictureAutomatic Operation Features Glossary Cable Box/DSS Receiver Output Channel channel 03 orSpecifications Helpful Hints Helpful Hints cont’d Renewed Index Supplied Accessories