Graco PD169096A owner manual Vehicle Seat Belt Requirements, For Built-in Harness Only

Page 11

8.2 Vehicle Seat Belt Requirements

MANY SEAT BELT SYSTEMS ARE NOT SAFE TO USE

WITH THE CHILD RESTRAINT. THE VEHICLE SEAT BELT

MUST BE DESIGNED TO HOLD THE CHILD RESTRAINT

TIGHTLY AT ALL TIMES. Pay careful attention to these systems; some of the seat belts that are not safe to use look very much like seat belts that are safe to use. If you are unsure,

consult your vehicle owner’s manual or call Graco Children’s Products Inc., 1-800-345-4109.

8.4For Built-in Harness Only

‡Lap Belts - Manually AdMusted When buckled, the belt is tightened

manually by pulling on the excess belt.

8.3 SAFE Vehicle Seat Belt Systems

THE FOLLOWING BELT SYSTEMS CAN BE USED WITH YOUR CHILD RESTRAINT, IF the seat location meets all other requirements of these instructions and those in your vehicle owner's manual. LATCH can be used in place of the following vehicle belt systems if your vehicle is equipped with LATCH anchor points. Please refer to vehicle owners manual for LATCH locations.

‡Lap Belts with Automatic Locking Retractor (ALR)

The automatic locking retractor will not permit the lap belt to lengthen once it is buckled. Tighten the belt by feeding the belt back into the retractor while pushing down hard on the child restraint.

20

21

Page 10 Page 12
Image 11
Page 10 Page 12
Contents Rgos Table of Contents Page Register Your Child Restraint Model Number Manufactured Purchase DateFeatures Harness Strap Arm Slot Assembling the Child RestraintPage Damaged or Missing PARTS. Do not use Unsecured in Your VEHICLE. AnVery HOT if Left in the SUN. Contact with AN Accident of ANY KIND. An accidentYour child must meet all requirements Height and Weight LimitationsWith Built-In Harness Without Built-in HarnessChoosing an Appropriate Vehicle Seat Location Without Back Support‡ Lap Belts with Automatic Locking Retractor ALR Vehicle Seat Belt RequirementsFor Built-in Harness Only Safe Vehicle Seat Belt SystemsRepeat above steps until secure With or Without Built-in Harness To Install Locking Clip‡ Combination LapShoulder Belt with Locking Latch Plate ‡ Lap Belts Forward of Seat Crease Unsafe Vehicle Belt Systems‡ Lap Belts with Emergency Locking Retractor ELR ‡ Combination LapShoulder Belt with RetractorLatch What is LATCH?Latch System Using Child Restraint with Built-in HarnessUnbuckle harness straps œ Location, p Safety Check for Secure InstallationSecuring the Child Restraint in Your Vehicle Tighten vehicle seat beltLay flat and not be twisted With Latch‡ Avoid bulky clothing Securing Your Child in the Child RestraintMust above the shoulders œ Adjusting Head Support/Harness StrapsHarness straps must be even with or To use without built in harness Remove harness straps Check Harness SystemHarness Removal To prevent serious injury or deathPage Harness Strap Using Your Child Restraint Without Built-in Harness Securing Child & Booster Seat in Vehicle Removing Back Support Adjusting Head Support in Booster ModePage Page Correct Incorrect Using the Tether Storing Lower Anchors and Tether Latch To prevent ejection in sudden stop or crash Important points to rememberRecline Foot Care and MaintenanceBleach To Remove Head Support and Seat Covers
Top Page Image Contents