Graco PD169096A Check Harness System, Harness Removal, To prevent serious injury or death

Page 21

14.0 Check Harness System

To prevent serious injury or death:

t,FFQIBSOFTTTUSBQTTOVHBOEQPTJUJPOFEPO

TIPVMEFSTXJUIIBSOFTTDMJQBUBSNQJUMFWFM

t%POPUVTFTUSBQDPWFSTCMBOLFUTDVTIJPOTPS

QBEEJOHVOEFSIBSOFTTTUSBQTPSDIJMEVOMFTT

QSPWJEFECZ(SBDP

t$IJMETIPVMECFESFTTFEJODMPUIJOHUIBUEPFTOPU

JOUFSGFSFXJUICVDLMJOHUIFIBSOFTT

20 to 70 lbs (mass between 9 and 31.8 kg) and at least one year old.

Harness straps/head support must be at or just above shoulders.

To adjust head support/harness strap height see page 39.

	15.0 Harness Removal
	To use without built in harness:
	1. Remove harness straps.
	1. Remove harness straps.
	Open harness clip and harness buckle .

2. Face the rear of the seat and remove the belt straps from metal junction plate as shown .

3. Remove crotch strap by pushing the strap
retainer on bottom of seat, up through slot.

40

41

Image 21

Contents Rgos Table of Contents Page Register Your Child Restraint Model Number Manufactured Purchase DateFeatures Harness Strap Arm Slot Assembling the Child RestraintPage Very HOT if Left in the SUN. Contact with Unsecured in Your VEHICLE. AnAN Accident of ANY KIND. An accident Damaged or Missing PARTS. Do not useWith Built-In Harness Height and Weight LimitationsWithout Built-in Harness Your child must meet all requirementsChoosing an Appropriate Vehicle Seat Location Without Back SupportFor Built-in Harness Only Vehicle Seat Belt RequirementsSafe Vehicle Seat Belt Systems ‡ Lap Belts with Automatic Locking Retractor ALRWith or Without Built-in Harness To Install Locking Clip ‡ Combination LapShoulder Belt with Locking Latch PlateRepeat above steps until secure ‡ Lap Belts with Emergency Locking Retractor ELR Unsafe Vehicle Belt Systems‡ Combination LapShoulder Belt with Retractor ‡ Lap Belts Forward of Seat CreaseLatch What is LATCH?Latch System Using Child Restraint with Built-in HarnessUnbuckle harness straps œ Securing the Child Restraint in Your Vehicle Safety Check for Secure InstallationTighten vehicle seat belt Location, pLay flat and not be twisted With Latch‡ Avoid bulky clothing Securing Your Child in the Child RestraintAdjusting Head Support/Harness Straps Harness straps must be even with orMust above the shoulders œ Harness Removal Check Harness SystemTo prevent serious injury or death To use without built in harness Remove harness strapsPage Harness Strap Using Your Child Restraint Without Built-in Harness Securing Child & Booster Seat in Vehicle Removing Back Support Adjusting Head Support in Booster ModePage Page Correct Incorrect Using the Tether Storing Lower Anchors and Tether Latch To prevent ejection in sudden stop or crash Important points to rememberRecline Foot Care and MaintenanceBleach To Remove Head Support and Seat Covers