Graco PD169096A owner manual To Remove Head Support and Seat Covers, Bleach

Page 33

26.0 To Remove Head Support and Seat Covers

	Hook and loop

HEAD SUPPORT COVER: clean with a damp sponge using mild soap and cool water. If necessary, cover may be removed for cleaning.

1.Remove harness and crotch straps (see Section 15.0, Harness Removal, p.41-45).

2.Remove elastic loops from head support as indicated in .

3.Remove head support cover as shown.

4.Machine wash cover in cold water on delicate cycle and drip-dry. DO NOT USE

BLEACH.

5.To put the head support cover back on, reverse preceding instructions.

64

SEAT COVER: clean with a damp sponge using mild soap and cool water. If necessary, cover may be removed for cleaning.

1.Remove harness and crotch straps (see Section 15.0, Harness Removal, p.41-45).

2.Remove elastic loops from seat as indicated in .

3.Remove seat cover as shown.

4.Machine wash cover in cold water on delicate cycle and drip-dry. DO NOT USE

BLEACH.

5.To put the seat cover back on, reverse preceding instructions.

attachment tape

Hook and loop attachment tape

65

Image 33

Contents Rgos Table of Contents Page Register Your Child Restraint Model Number Manufactured Purchase DateFeatures Harness Strap Arm Slot Assembling the Child RestraintPage Very HOT if Left in the SUN. Contact with Unsecured in Your VEHICLE. AnAN Accident of ANY KIND. An accident Damaged or Missing PARTS. Do not useWith Built-In Harness Height and Weight LimitationsWithout Built-in Harness Your child must meet all requirementsChoosing an Appropriate Vehicle Seat Location Without Back SupportFor Built-in Harness Only Vehicle Seat Belt RequirementsSafe Vehicle Seat Belt Systems ‡ Lap Belts with Automatic Locking Retractor ALRWith or Without Built-in Harness To Install Locking Clip ‡ Combination LapShoulder Belt with Locking Latch PlateRepeat above steps until secure ‡ Lap Belts with Emergency Locking Retractor ELR Unsafe Vehicle Belt Systems‡ Combination LapShoulder Belt with Retractor ‡ Lap Belts Forward of Seat CreaseLatch What is LATCH?Latch System Using Child Restraint with Built-in HarnessUnbuckle harness straps œ Securing the Child Restraint in Your Vehicle Safety Check for Secure InstallationTighten vehicle seat belt Location, pLay flat and not be twisted With Latch‡ Avoid bulky clothing Securing Your Child in the Child RestraintAdjusting Head Support/Harness Straps Harness straps must be even with orMust above the shoulders œ Harness Removal Check Harness SystemTo prevent serious injury or death To use without built in harness Remove harness strapsPage Harness Strap Using Your Child Restraint Without Built-in Harness Securing Child & Booster Seat in Vehicle Removing Back Support Adjusting Head Support in Booster ModePage Page Correct Incorrect Using the Tether Storing Lower Anchors and Tether Latch To prevent ejection in sudden stop or crash Important points to rememberRecline Foot Care and MaintenanceBleach To Remove Head Support and Seat Covers