3.Pull the seat pad out of the way to reveal red buttons as shown in . Slide the buttons to release the back support from the base and lower it into a flat position.
When removing back support, you must support the back support when sliding the red buttons that disengage the back support from the base. Make sure all hands, fingers and other objects are not behind the back support when removing it.
|
5.Once back support is separated , store back support with all the harness straps, head support, body support and crotch pad cover in safe place.
6.Reattach the elastic straps at the back of the seat and through the vehicle belt guide on the sides of seat as shown.
4.Move seat pad fabric out of the way and
squeeze red buttons together to release back support from seat. Pull seat and back support apart .
|
7. Seat is ready to install.
To reattach back support if needed, reverse steps from p. 53 to p. 51.
52 | 53 |