9.2 LATCH System
LATCH consists of a permanently attached lower anchor belt and a top tether strap.
ONLY use LATCH in a seating position recommended by vehicle manufacturer.
LATCH lower vehicle anchor points are defined as 11 inches from the center of one LATCH anchor to the center of another LATCH anchor. If allowed by your Vehicle Owners Manual, the center seating position maybe used if the anchor spacing is 11” or greater.
10.0 Using Child Restraint WITH Built-in Harness
FAILURE TO PROPERLY ADJUST THE HARNESS STRAPS
FOR YOUR CHILD INCREASES THE RISK OF SERIOUS
INJURY OR DEATH IN THE EVENT OF A SHARP TURN, SUDDEN STOP OR CRASH. Snugly adjust the belts provided with this child restraint around your child. A snug strap should not allow any slack. It lies in a relatively straight line without sagging. It does not press on the child’s flesh or push the child’s body into an unnatural position.
Vehicle Top Tether | Child Restraint |
Anchor Point | Top Tether |
1.Loosen the harness straps by lifting the harness adjuster lever at front of seat near the adjustment strap and pulling the straps toward you .
2.Open harness clip .
Vehicle Lower Anchor Points
Lower |
Anchor Belt |
28
29