Graco PD169096A Unsafe Vehicle Belt Systems, ‡ Lap Belts with Emergency Locking Retractor ELR

Page 13

8.7 UNSAFE Vehicle Belt Systems

DO NOT USE ANY OF THE FOLLOWING SYSTEMS TO SECURE THE CHILD RESTRAINT. LATCH can be used IN PLACE OF the following unsafe belt systems if your vehicle is equipped with LATCH anchor points. Please refer to the vehicle owners manual for LATCH locations. NEVER USE unsafe belt systems.

‡ Lap Belts with Emergency

Locking Retractor (ELR)

This lap belt stays loose and can move until it locks in a crash or sudden stop.

‡ Combination LapShoulder Belt with Retractor

Each strap has a retractor at one end and is attached to the latch plate at the other end.

‡ Passive Restraint - Lap or Shoulder Belt Mounted on Door

24

‡Passive Restraint -

Lap Belt with Motorized Shoulder Belt

DO NOT use vehicle belts that are attached to the door in any way or that move along a track to automatically surround the passenger when the door is closed.

‡Lap Belts Forward of Seat Crease

Vehicle seat belts located forward of seat crease may not securely hold child restraint. Check vehicle owner’s manual or see vehicle dealer for car seat installation requirements.

‡If approved for use with child restraint, install child restraint and check for secure installation by pulling child restraint front to back. If child restraint slides forward, DO NOT use these seat belts.

25

Image 13
Contents Rgos Table of Contents Page Register Your Child Restraint Model Number Manufactured Purchase DateFeatures Harness Strap Arm Slot Assembling the Child RestraintPage Very HOT if Left in the SUN. Contact with Unsecured in Your VEHICLE. AnAN Accident of ANY KIND. An accident Damaged or Missing PARTS. Do not useWith Built-In Harness Height and Weight LimitationsWithout Built-in Harness Your child must meet all requirementsChoosing an Appropriate Vehicle Seat Location Without Back SupportFor Built-in Harness Only Vehicle Seat Belt RequirementsSafe Vehicle Seat Belt Systems ‡ Lap Belts with Automatic Locking Retractor ALR‡ Combination LapShoulder Belt with Locking Latch Plate With or Without Built-in Harness To Install Locking ClipRepeat above steps until secure ‡ Lap Belts with Emergency Locking Retractor ELR Unsafe Vehicle Belt Systems‡ Combination LapShoulder Belt with Retractor ‡ Lap Belts Forward of Seat CreaseLatch What is LATCH?Latch System Using Child Restraint with Built-in HarnessUnbuckle harness straps œ Securing the Child Restraint in Your Vehicle Safety Check for Secure InstallationTighten vehicle seat belt Location, pLay flat and not be twisted With Latch‡ Avoid bulky clothing Securing Your Child in the Child RestraintHarness straps must be even with or Adjusting Head Support/Harness StrapsMust above the shoulders œ Harness Removal Check Harness SystemTo prevent serious injury or death To use without built in harness Remove harness strapsPage Harness Strap Using Your Child Restraint Without Built-in Harness Securing Child & Booster Seat in Vehicle Removing Back Support Adjusting Head Support in Booster ModePage Page Correct Incorrect Using the Tether Storing Lower Anchors and Tether Latch To prevent ejection in sudden stop or crash Important points to rememberRecline Foot Care and MaintenanceBleach To Remove Head Support and Seat Covers