Graco PD169096A Model Number Manufactured Purchase Date, Register Your Child Restraint

Page 4

2.0Registration Information

Model Number:

Manufactured in:

Purchase Date:

2.1Register Your Child Restraint

Please ¿ll in the above information. The model number and manufactured in (date) can be found on

2.3If You Need Help

Please contact our Customer Service Department with any questions you may have concerning parts, use, or maintenance. When you contact us, please have your product’s model and manufactured in (date) ready so that we may help you ef¿ciently. These numbers can be found on a label on the child restraint.

USA: 1-800-345-4109 or www.gracobaby.com

3.0Useful Information

a label on the child restraint. Fill out the prepaid registration postcard attached to the harness and mail it today.

Child restraints could be recalled for safety reasons. You must register this restraint to be reached in a recall. Send your name, address, and the restraint’s model number and manufacturing date to:

Graco Children’s Products Inc.

150 Oaklands Blvd. Exton, PA, 19341 or call 1-800-345-4109

or register online at:

http://www.gracobaby.com/carseatregistration

2.2For Recall Information

Call the U.S. Government’s Vehicle Safety Hotline at: 1-888-327-4236 (TTY:1-800-424-9153), or go to http://www.NHTSA.gov or contact Graco:

1-800-345-4109 or www.gracobaby.com

6

3.1CertiÀcation

THIS CHILD RESTRAINT CONFORMS to all applicable Federal Motor Vehicle Safety Standards and is certi¿ed for use in motor vehicles.

It is certi¿ed for use in Aircraft only when used with the built-in harness. When used as a booster without the harness, this restraint is not certi¿ed for use in aircraft.

3.2Child Restraint Useful Life

STOP using child restraint and throw it away after the date MOLDED into the child restraint.

Look for the date molded into the seat in the location shown.

3.3Second Hand Child Restraint

Graco Children’s Products Inc. advises against loaning or passing along a child restraint.

7

Image 4
Contents Rgos Table of Contents Page Model Number Manufactured Purchase Date Register Your Child RestraintFeatures Assembling the Child Restraint Harness Strap Arm SlotPage Unsecured in Your VEHICLE. An Very HOT if Left in the SUN. Contact withAN Accident of ANY KIND. An accident Damaged or Missing PARTS. Do not useHeight and Weight Limitations With Built-In HarnessWithout Built-in Harness Your child must meet all requirementsWithout Back Support Choosing an Appropriate Vehicle Seat LocationVehicle Seat Belt Requirements For Built-in Harness OnlySafe Vehicle Seat Belt Systems ‡ Lap Belts with Automatic Locking Retractor ALR‡ Combination LapShoulder Belt with Locking Latch Plate With or Without Built-in Harness To Install Locking ClipRepeat above steps until secure Unsafe Vehicle Belt Systems ‡ Lap Belts with Emergency Locking Retractor ELR‡ Combination LapShoulder Belt with Retractor ‡ Lap Belts Forward of Seat CreaseWhat is LATCH? LatchUsing Child Restraint with Built-in Harness Latch SystemUnbuckle harness straps œ Safety Check for Secure Installation Securing the Child Restraint in Your VehicleTighten vehicle seat belt Location, pWith Latch Lay flat and not be twistedSecuring Your Child in the Child Restraint ‡ Avoid bulky clothingHarness straps must be even with or Adjusting Head Support/Harness StrapsMust above the shoulders œ Check Harness System Harness RemovalTo prevent serious injury or death To use without built in harness Remove harness strapsPage Harness Strap Using Your Child Restraint Without Built-in Harness Securing Child & Booster Seat in Vehicle Adjusting Head Support in Booster Mode Removing Back SupportPage Page Correct Incorrect Using the Tether Storing Lower Anchors and Tether Latch Important points to remember To prevent ejection in sudden stop or crashCare and Maintenance Recline FootTo Remove Head Support and Seat Covers Bleach