Graco PD169096A owner manual Features

Page 5

4.0 Features

The locking clip is stored on the back of the child restraint. You will need to use it with certain types of vehicle seat belts.

United States Federal Motor Vehicle Safety Standards have de¿ned a new system for installing child restraints in vehicles. The system is called LATCH (Lower Anchors and Tethers for CHildren). LATCH may ONLY be used

IN PLACE of vehicle belt if vehicle is equipped with LATCH anchor points. Please refer to vehicle owners manual for LATCH locations in vehicles.

Image 5

Contents Rgos Table of Contents Page Register Your Child Restraint Model Number Manufactured Purchase DateFeatures Harness Strap Arm Slot Assembling the Child RestraintPage Very HOT if Left in the SUN. Contact with Unsecured in Your VEHICLE. AnAN Accident of ANY KIND. An accident Damaged or Missing PARTS. Do not useWith Built-In Harness Height and Weight LimitationsWithout Built-in Harness Your child must meet all requirementsChoosing an Appropriate Vehicle Seat Location Without Back SupportFor Built-in Harness Only Vehicle Seat Belt RequirementsSafe Vehicle Seat Belt Systems ‡ Lap Belts with Automatic Locking Retractor ALRRepeat above steps until secure With or Without Built-in Harness To Install Locking Clip‡ Combination LapShoulder Belt with Locking Latch Plate ‡ Lap Belts with Emergency Locking Retractor ELR Unsafe Vehicle Belt Systems‡ Combination LapShoulder Belt with Retractor ‡ Lap Belts Forward of Seat CreaseLatch What is LATCH?Latch System Using Child Restraint with Built-in HarnessUnbuckle harness straps œ Securing the Child Restraint in Your Vehicle Safety Check for Secure InstallationTighten vehicle seat belt Location, pLay flat and not be twisted With Latch‡ Avoid bulky clothing Securing Your Child in the Child RestraintMust above the shoulders œ Adjusting Head Support/Harness StrapsHarness straps must be even with or Harness Removal Check Harness SystemTo prevent serious injury or death To use without built in harness Remove harness strapsPage Harness Strap Using Your Child Restraint Without Built-in Harness Securing Child & Booster Seat in Vehicle Removing Back Support Adjusting Head Support in Booster ModePage Page Correct Incorrect Using the Tether Storing Lower Anchors and Tether Latch To prevent ejection in sudden stop or crash Important points to rememberRecline Foot Care and MaintenanceBleach To Remove Head Support and Seat Covers