Graco PD169096A owner manual Assembling the Child Restraint, Harness Strap Arm Slot

Page 6

5.0 Assembling the Child Restraint

Adult assembly required.

1.Lay child restraint flat on back. Grab seat pad fabric in sitting area to expose the gutters .

MAKE SURE all hands, fingers and other objects are clear of the gutters.

2.MAKE sure the harness straps are securely attached within the “T”-shaped slots around the arms as shown .

With your other hand, raise seat back so that both arms LOCK into the gutters .

KEEP GUTTERS CLEAR

KEEP GUTTERS CLEAR

3. Arms should CLICK into the gutters. Seat assembly should appear as shown .

Harness Strap
Arm	T-slot

CLICK!

10

11

Image 6

Contents Rgos Table of Contents Page Model Number Manufactured Purchase Date Register Your Child RestraintFeatures Assembling the Child Restraint Harness Strap Arm SlotPage AN Accident of ANY KIND. An accident Unsecured in Your VEHICLE. AnVery HOT if Left in the SUN. Contact with Damaged or Missing PARTS. Do not useWithout Built-in Harness Height and Weight LimitationsWith Built-In Harness Your child must meet all requirementsWithout Back Support Choosing an Appropriate Vehicle Seat LocationSafe Vehicle Seat Belt Systems Vehicle Seat Belt RequirementsFor Built-in Harness Only ‡ Lap Belts with Automatic Locking Retractor ALRWith or Without Built-in Harness To Install Locking Clip ‡ Combination LapShoulder Belt with Locking Latch PlateRepeat above steps until secure ‡ Combination LapShoulder Belt with Retractor Unsafe Vehicle Belt Systems‡ Lap Belts with Emergency Locking Retractor ELR ‡ Lap Belts Forward of Seat CreaseWhat is LATCH? LatchUsing Child Restraint with Built-in Harness Latch SystemUnbuckle harness straps œ Tighten vehicle seat belt Safety Check for Secure InstallationSecuring the Child Restraint in Your Vehicle Location, pWith Latch Lay flat and not be twistedSecuring Your Child in the Child Restraint ‡ Avoid bulky clothingAdjusting Head Support/Harness Straps Harness straps must be even with orMust above the shoulders œ To prevent serious injury or death Check Harness SystemHarness Removal To use without built in harness Remove harness strapsPage Harness Strap Using Your Child Restraint Without Built-in Harness Securing Child & Booster Seat in Vehicle Adjusting Head Support in Booster Mode Removing Back SupportPage Page Correct Incorrect Using the Tether Storing Lower Anchors and Tether Latch Important points to remember To prevent ejection in sudden stop or crashCare and Maintenance Recline FootTo Remove Head Support and Seat Covers Bleach