Graco PD169096A Important points to remember, To prevent ejection in sudden stop or crash

Page 31

22.0 Airplane Use

This restraint is certified for use in Motor Vehicles.

It is certified for use in Aircraft ONLY when used with the built-in harness.

When used as a booster WITHOUT the harness, this restraint is NOT CERTIFIED for aircraft use because aircraft seats do not have a shoulder belt.

Important points to remember:

1.Airlines have some restrictions about the use of child restraints.

2.Install your car seat on an airplane in the same way it is installed in an automobile with a lap belt (see Section 11.1, Using Child Restraint WITH a Built-in Harness, p. 32).

3.Check that the airplane seat belt holds the child restraint securely in place at all times.

23.0Accessories (on certain models ONLY)

23.1Body Support & Harness Covers

To prevent ejection in sudden stop or crash:

Never allow body support to bunch or fold behind child.

Make sure that harness covers do not interfere with placement of the chest clip at armpit level.

Body support is not to be used by children over 35lbs.

60

61

Image 31

Contents Rgos Table of Contents Page Register Your Child Restraint Model Number Manufactured Purchase DateFeatures Harness Strap Arm Slot Assembling the Child RestraintPage Damaged or Missing PARTS. Do not use Unsecured in Your VEHICLE. AnVery HOT if Left in the SUN. Contact with AN Accident of ANY KIND. An accidentYour child must meet all requirements Height and Weight LimitationsWith Built-In Harness Without Built-in HarnessChoosing an Appropriate Vehicle Seat Location Without Back Support‡ Lap Belts with Automatic Locking Retractor ALR Vehicle Seat Belt RequirementsFor Built-in Harness Only Safe Vehicle Seat Belt Systems‡ Combination LapShoulder Belt with Locking Latch Plate With or Without Built-in Harness To Install Locking ClipRepeat above steps until secure ‡ Lap Belts Forward of Seat Crease Unsafe Vehicle Belt Systems‡ Lap Belts with Emergency Locking Retractor ELR ‡ Combination LapShoulder Belt with RetractorLatch What is LATCH?Latch System Using Child Restraint with Built-in HarnessUnbuckle harness straps œ Location, p Safety Check for Secure InstallationSecuring the Child Restraint in Your Vehicle Tighten vehicle seat beltLay flat and not be twisted With Latch‡ Avoid bulky clothing Securing Your Child in the Child RestraintHarness straps must be even with or Adjusting Head Support/Harness StrapsMust above the shoulders œ To use without built in harness Remove harness straps Check Harness SystemHarness Removal To prevent serious injury or deathPage Harness Strap Using Your Child Restraint Without Built-in Harness Securing Child & Booster Seat in Vehicle Removing Back Support Adjusting Head Support in Booster ModePage Page Correct Incorrect Using the Tether Storing Lower Anchors and Tether Latch To prevent ejection in sudden stop or crash Important points to rememberRecline Foot Care and MaintenanceBleach To Remove Head Support and Seat Covers