Graco PD169096A owner manual Harness Strap

Page 23

10. Remove harness straps from arms as shown in ¢.

Store the body support, harness covers, crotch	¢
pad cover and harness straps	¢
in safe place for future use.

Harness Strap

12. Tuck seat pad in between the gap of the

back support and seat area of the booster seat

to allow 2 elastic straps to show at the rear of

the seat.

ArmT-slot

11. Move seat pad fabric out of the way then raise seat back so that both arms LOCK into the gutters .

You should hear a CLICK when the arms lock into the gutters.

MAKE sure to keep the gutters clear of any obstructions.

KEEP

GUTTERS CLEAR

13. Attach 2 seat pad elastic straps onto the

hooks on the rear of the child restraint as

shown in .

14. Pull elastic strap on the seat pad through

the vehicle belt guide on side of seat and

attach to hook as shown.

Repeat on other side .

Reverse instructions to reinstall harness. See Section 10.0, page 29-31 for the correct path for the harness.

44

45

Image 23

Contents Rgos Table of Contents Page Register Your Child Restraint Model Number Manufactured Purchase DateFeatures Harness Strap Arm Slot Assembling the Child RestraintPage Damaged or Missing PARTS. Do not use Unsecured in Your VEHICLE. AnVery HOT if Left in the SUN. Contact with AN Accident of ANY KIND. An accidentYour child must meet all requirements Height and Weight LimitationsWith Built-In Harness Without Built-in HarnessChoosing an Appropriate Vehicle Seat Location Without Back Support‡ Lap Belts with Automatic Locking Retractor ALR Vehicle Seat Belt RequirementsFor Built-in Harness Only Safe Vehicle Seat Belt SystemsRepeat above steps until secure With or Without Built-in Harness To Install Locking Clip‡ Combination LapShoulder Belt with Locking Latch Plate ‡ Lap Belts Forward of Seat Crease Unsafe Vehicle Belt Systems‡ Lap Belts with Emergency Locking Retractor ELR ‡ Combination LapShoulder Belt with RetractorLatch What is LATCH?Latch System Using Child Restraint with Built-in HarnessUnbuckle harness straps œ Location, p Safety Check for Secure InstallationSecuring the Child Restraint in Your Vehicle Tighten vehicle seat beltLay flat and not be twisted With Latch‡ Avoid bulky clothing Securing Your Child in the Child RestraintMust above the shoulders œ Adjusting Head Support/Harness StrapsHarness straps must be even with or To use without built in harness Remove harness straps Check Harness SystemHarness Removal To prevent serious injury or deathPage Harness Strap Using Your Child Restraint Without Built-in Harness Securing Child & Booster Seat in Vehicle Removing Back Support Adjusting Head Support in Booster ModePage Page Correct Incorrect Using the Tether Storing Lower Anchors and Tether Latch To prevent ejection in sudden stop or crash Important points to rememberRecline Foot Care and MaintenanceBleach To Remove Head Support and Seat Covers