GTO GP-SW050 owner manual Technical Specifications, Motor

Page 10

Technical Specifications

Motor

•Brushless DC motor 24VDC 300 watts

•½ Horsepower

•Maximum motor current 20Amp

•2500 RPM

•Open and close time for 90° opening is approximately 15 seconds

Gear Reducer

•Aluminum Cased 1200:1, size 40/63, compound, worm reducer with ball bearings.

•Permanently lubricated with synthetic gear oil – oil specifications 5w-30, Mobil 1 recommended

Power

•120 vac @60 Hz with inherent 24 vdc battery backup

•Batteries are required – two 12 vdc, U1, 230A minimum cold crank amps wired together in series.

•100 cycles in backup typical for minimum size battery.

•15 amp circuit breaker on dedicated circuit

•On board 120 vac outlet for accessories that pull no more than 1 amp of current

Control

•Microcontroller based logic control board

•Adjustable autoclose

•Independent obstruction settings

•Diagnostic LED’s & Audible Alarms

•Accessory terminals compatible with loop detectors, photo beams, edge sensors, push buttons, card readers, exit wands, etc.

•Relay Outputs

•On board Open and Closed Stop buttons

•Jog Buttons

Construction

•Heavy duty steel frame

•Rotomolded UV stabilized HDPE cover

Operational Capacity

•Continuous duty operations

•Max rating: 16 ft gate @ 650 lbs

•Dual Gate compatible using two conductor 22 AWG shielded wire rated for direct burial. Recommended

Belden Wire®, 22 AWG, type 8761, 9461, 9451, 1266A or equivalent. 1-pair shielded with drain wire. Available at your local electrical supply store.

Dimensions

•Housing Dimensions: height 33 in (68.7 cm), depth 18 in (45.7 cm), width 15 in (38 cm), shipping weight: 130 lbs

•Concrete Pad Dimensions: 18 in x 18 in, (45.7 cm x 45.7 cm). Consult local building codes for depth below ground level. Absolute minimum depth 30 in (76.2 cm) below ground level.

Operational Temperature:

•In colder climates (ambient temperatures less than 10 degrees) GTO recommends the use of a thermostatically controlled heating source (ceramic heating strips, etc.) on the batteries and gearbox assembly. Styles, types, and power requirements of heating devices will vary by climate and region.

Warranty:

•Residential (7) years for mechanical parts, (5) years electronic components

•Commercial (5) years for mechanical parts, (3) years electronic components

7

Page 9 Page 11
Image 10
Page 9 Page 11
Contents GP-SW050 Conversion Chart Vehicular gate operator class categoriesTable of Contents Important Safety Instructions for the System Designer Before Installation III. After InstallationMeans of Protection Against Entrapment Important Safety Instructions for the Consumer/End User Required Safety Precautions for Gates Entrapment ProtectionMoving Gate Can Cause Injury Or Death Technical Specifications MotorParts Identification Operator ChassisInstalling the Gate Operator Preparation of the GateUsing the Mounting Template Before mounting the operator, check the followingTemplateMounting Removing the Operator Housing Mounting the OperatorConnecting Power to the Operator Not providedGate Arm Connection Overview Right Mounted ArmConnecting the Gate Arm to the Gate Install the key into the output shaft. FigControl Board Description ExitSetting the Limits Open Limit SettingStall Force and Auto-Close Adjustments Stall Force AdjustmentDIP Switch Settings DIP #1 Open DirectionInput Connections GTO Loop Detector Button Station Accessory Terminal ConnectionsSiren-Activated Entry Device Output Connections Lock COM and Lock N.O. / Lock N.C. Lock relay outputAccessory Power Supply Connection 12Vdc @ 300 mA Power SupplyWiring a 3-button station Prison Mode Operation Class IV ApplicationsReinstalling the Operator Housing Installing a Dual Gate Operator System Dual Gate Link ConnectionSetting Dual Gate Sequence Slave DIP Switch SettingsOverview of a Dual Gate Operator Installation Slave OperatorMaintenance Maintenance ScheduleTroubleShooting Guide GP-SW050 Audible FeedbackShadow LED on Safety LED onCycle LED on brightly Open Edge LED onClose LED on brightly Close Edge LED onOpen LED on brightly Stop LED on brightlyWarranty and Repair Service Instructions for the Consumer/End UserInstallation of this operator conforms to Class Installation ChecklistW . g t o a c c e s s . c o m

GP-SW050 specifications

The GTO GP-SW050 is a cutting-edge satellite dish that stands out in the realm of satellite communications. Designed for efficiency and durability, this model offers users a robust solution for receiving satellite signals, making it ideal for both residential and commercial applications.

One of the main features of the GTO GP-SW050 is its advanced materials construction. The dish is crafted from high-quality, weather-resistant materials that ensure longevity even in harsh environmental conditions. The reflective surface of the dish is engineered to maximize signal reception, enhancing the clarity and reliability of the transmitted data.

In terms of technology, the GTO GP-SW050 employs a unique multi-band reception capability. This allows it to operate across different frequency bands, making it versatile for various satellite services. Users can enjoy seamless access to television, internet, and data services without the need for multiple dishes.

The design of the GTO GP-SW050 emphasizes ease of installation and use. The dish features a lightweight structure, which simplifies the mounting process and reduces the overall installation time. Additionally, the adjustable mounting bracket allows for precise alignment, ensuring optimal signal reception.

Another significant characteristic of the GTO GP-SW050 is its compatibility with various satellite systems. Whether you are subscribing to local or international satellite providers, this dish can be tailored to meet specific service requirements. Its broad compatibility spans multiple satellite networks, making it a future-proof solution in a rapidly advancing technology landscape.

Moreover, the GTO GP-SW050 is equipped with advanced signal processing capabilities. This includes features that enhance signal strength and reduce interference, providing users with a stable connection even in areas more prone to signal disruptions.

When considering power consumption, the GTO GP-SW050 is designed for efficiency, minimizing energy use while maximizing performance. This emphasis on sustainability makes it not only a smart investment but also an environmentally-conscious choice.

In conclusion, the GTO GP-SW050 represents a blend of reliability, performance, and innovation. With its advanced features, durable construction, and versatile technology, it is an excellent choice for individuals looking to enhance their satellite communication experience. Its user-friendly design further reinforces its position as a top choice for both casual users and tech-savvy professionals.
Top Page Image Contents