GE FVR-C9S-2UX Drive Series instruction manual Function Explanation, Function Code Tables

FVR-C9S-2UX

13. Function Explanation

Function Code Tables

Function	Function	Date Code Range	Unit	Min.	Factory	Change
						During
Code				Set.	Setting
						Operation
F00	Data protection	0: Data change possible	—	—	0	No
		1: Data change not possible
F01	Frequency	0: Keypad panel (UP/DOWN keys)	—	—	1	No
	Command	1: Analog input (VR, DC0 - 10V or DC4 - 20mA)
F02	Operation	0: Keypad panel operation (RUN/STOP keys)	—	—	0	No
	Command	1: External signal operation (FWD/REV terminals)
F03	Maximum	50 - 120 Hz	Hz	1	60 Hz	No
	Frequency
F04	Base Frequency	50 - 120 Hz	Hz	1	60 Hz	No
F05	Acceleration TIme	0.0 - 60s (0.0 setting = 0.01s)	s	0.1	6.0s	Yes
F06	Deceleration Time	0.0 - 60s (0.0 setting = 0.01s)	s	0.1	6.0s	Yes
F07	Torque Boost	0 - 31 (code)	—	—	13	Yes
	Electronic Thermal	0: Inactive
F08	Overload Relay	1: Active (standard 4-pole motor)	—	—	0	No
	Operation	2: Active (forced-air cooled motor)
	Electronic Thermal
F09	Overload Relay	30 - 105% of rated current of drive	%	1	100%	No
	Level
	Restart after	0: Inactive
F10	Momentary Power		—	—	0	No
		1: Active (Restart drive in 0.5s after power failure)
	Failure
F11	Gain for Frequency	0: For 0 - 10 V	—	—	0	No
	Setting Signal	1: For 0 - 5 V
F12	DC Brake (Level	0 - 100%	—	1	50%	Yes
	Setting)
F13	DC Brake (Time)	0.0 (inactive) 0.1 - 30s	s	0.1	0.1s	Yes
F14	Starting Frequency	1 - 6 Hz	Hz	1	1 Hz	No

24

C92-01