JAI CV-M4+, M7+ CL, CV-M7+, M4+ CL Continuous Operation Non triggered, Polarity and other functions

Page 13

CV-M4+/M4+CL, CV-M7+/M7+CL

6.3. Continuous Operation (Non triggered)

Mode settings can be done with either RS-232C or switches. Trigger Mode Normal. TR=0. It is for applications where the camera is continuous running without external trigger. The shutter mode can be normal or programmable exposure. (SM=0, SM=1). The shutter will work in all 10 steps up to 1/10,000 second or with the programmable exposure in 1056 steps. In partial scanning and binning modes (M4+ and M4CL+ only), shutter times longer than the actual frame time has no meaning. The exposure will be equal the frame time. Fig. 16. show horizontal timing details, and Fig. 17. through 18. shows vertical timing details with binning and partial scanning.

To use this mode:

 

Set function:

Trigger mode

TR=0

 

Shutter mode “Normal” or “Programmable”

SM=0, SM=1

 

Polarity and other functions

 

Fig. 16. Horizontal timing details.

Fig.16A. Horizontal timing details with V binning.

- 12 -

Image 13
Contents CV-M4+/M4+CL CV-M7+/M7+CL CV-M4+/M4+CL, CV-M7+/M7+CL General Main FeaturesStandard Composition Locations Locations and FunctionsDigital Output Connector for EIA-644 Lvds Pin Multi-connector DC-IN/RS232CPin Assignment Video signal, LEN, FEN Digital Output Connector for Camera LinkDval and EEN Video output Input and Output CircuitsTrigger input Multi Shutter input Composite Sync outputMUX Camera Link interfaceFunctions and Operations CV-M4+Block DiagramBasic functions Binning Color coding from a Primary RGB CCD Bayer filter Color versions CV-M7+and CV-M7+CLRestart Continuous Trigger mode. RCT Output of Timing SignalsPolarity and other functions Continuous Operation Non triggeredVertical timing details, full frame Vertical timing details with 1/2 partial scanning Accumulation latency time for H a-synchronous trigger External Trigger ModesImportant notes on using this mode Edge Pre-select ModeEdge Pre-select, smearless Pulse Width Pulse Width Control ModeFrame Delay Frame-delay read out ModeMultiple exposure, normal and smearless Frame-delay read out Mode with multiple exposureGain and set-up Other FunctionsMode setting SW1 on rear Configuring the CameraMode setting SW301 inside Internal Switch and Jumper SettingsRS-232C control Timing and shutter related commands CV-M4+command listCamera Control Tool for CV-M4+ Specifications External Appearance and DimensionsSpectral sensitivity Specifications Specification tableTypical CCD Characteristics PrecautionsAppendix Camera Link test points Camera Link Test pointsUsers Record Users Mode Settings Users Modifications