JAI CV-M7+, M7+ CL, M4+ CL operation manual Camera Control Tool for CV-M4+

Page 26

CV-M4+/M4+CL, CV-M7+/M7+CL

7.6. Camera Control Tool for CV-M4+

From www.jai.com Camera Control Tool for Windows 98/NT/2000 can be downloaded.

The control tool contents a camera control program and tools for making your own program. Below the different windows are shown.

Fig. 28. Camera control tool windows.

For the integrator and experienced user, the Camera Control Toll is much more than a program with a window interface- It also provides an easy and efficient ActiveX interface built for MS Windows 98, ME, NT and 2000. The OCX interface has the ability to connect to the camera using the serial interface of the PC by reading and writing properties for the camera. This integration requires simple programming skills within Visual Basic, Visual C++ or similar languages in a Microsoft Windows environment.

- 25 -

Image 26

Contents CV-M4+/M4+CL CV-M7+/M7+CL CV-M4+/M4+CL, CV-M7+/M7+CL Standard Composition Main FeaturesGeneral Locations and Functions LocationsPin Assignment Pin Multi-connector DC-IN/RS232CDigital Output Connector for EIA-644 Lvds Dval and EEN Digital Output Connector for Camera LinkVideo signal, LEN, FEN Trigger input Multi Shutter input Input and Output CircuitsVideo output Composite Sync outputCamera Link interface MUXBasic functions CV-M4+Block DiagramFunctions and Operations Binning Color versions CV-M7+and CV-M7+CL Color coding from a Primary RGB CCD Bayer filterOutput of Timing Signals Restart Continuous Trigger mode. RCTContinuous Operation Non triggered Polarity and other functionsVertical timing details, full frame Vertical timing details with 1/2 partial scanning External Trigger Modes Accumulation latency time for H a-synchronous triggerEdge Pre-select Mode Important notes on using this modeEdge Pre-select, smearless Pulse Width Control Mode Pulse WidthFrame-delay read out Mode Frame DelayFrame-delay read out Mode with multiple exposure Multiple exposure, normal and smearlessOther Functions Gain and set-upMode setting SW301 inside Configuring the CameraMode setting SW1 on rear Internal Switch and Jumper SettingsRS-232C control CV-M4+command list Timing and shutter related commandsCamera Control Tool for CV-M4+ Spectral sensitivity External Appearance and DimensionsSpecifications Specification table SpecificationsAppendix PrecautionsTypical CCD Characteristics Camera Link Test points Camera Link test pointsUsers Mode Settings Users Modifications Users Record