JAI TM-1020 operation manual Shutter Speed Control Dial LVDS/RS-422 version, Manual Async

Page 20

Page 10

TM-1020 Series Progressive Scan Shutter Cameras

2.2.3Shutter Speed Control Dial (LVDS/RS-422 version)

Shutter speed can be selected by switching the shutter dial to the appropriate setting (0 through 9). The factory default settings correspond to the shutter speeds as shown in Table 5 below.

TABLE 5.		Shutter Speed Control Dial

		Manual	Async

0		no shutter	no shutter

1		1/60	1/16,000

2		1/125	1/8,000

3		1/250	1/4,000

4		1/500	1/2,000

5		1/1000	1/1,000

6		1/2,000	1/500

7		1/4,000	1/250

8		1/8,000	1/125

9		1/16,000	Ext. pulse-width control

2.2.4RS-232 Communication Cable (LVDS/RS-422 version)

FIGURE 4. Serial Communication Cable RS-232B-12

2000±20mm

40±3mm 1925±10mm

MALE

75mm±5mm

190±5mm

1 6

5 9

FEMALE

The RS-232 controller set CS-232E includes the RS-232B-12 interface cable, software disk, and a quick-start card. The TM-1020 (RS-422 and LVDS/RS-422 version) camera’s built-in look-up table (LUT) can be controlled by an external RS-232 interface. The camera settings can be programmed or changed using the communication cable and software. Commands from the RS-232 interface will over- write the rear panel switch settings of the camera. Please refer to the AccuPiXEL Series Camera- Control Software manual for details on the graphical user interface.

Installation

Image 20

Contents TM-1020 Series Progressive Scan Shutter Cameras Page CE Compliance JAI, IncPage Introduction Problems and Solutions SpecificationsDynamic Range Control Scan ModesList of Tables List of Tables List of Figures List of Figures TM-1020 Series Progressive Scan Shutter Cameras Product DescriptionMiniature size and light weight Asynchronous resetImager Electronic shutterIntegration WarrantyOutput TM-1020 Series System Configuration Accessories and Options Camera Setup Heat DissipationGetting Started Unpacking Instructions Components ListPin Connector LVDS/RS-422 version Description Connector Pin Configurations2 a 12-Pin Connector LVDS/RS-422 version 2 b 12-Pin Connector Camera Link Version Pin Connector CL Version DescriptionDigital Output Connector LVDS/RS-422 only Analog Output Connector Shutter Speed Control Dial LVDS/RS-422 version 4 RS-232 Communication Cable LVDS/RS-422 versionShutter Speed Control Dial Manual AsyncDigital Output Cable LVDS/RS-422 version Digital Output Cable 30DG-02Camera Link Cable CL Versions Only Camera Link CableJAI, Inc. Power Cables Power Supplies and Power Cable SetupPower Supplies Building Your Own Power Cable Attaching the Power Cable to the ConnectorAttaching the Analog Video Output 12P-02S Interface Cable Pin# Lead Color FunctionAttaching the Camera Lens 1 Up/Down Switch Mode Selection switch Shutter Speed Control switchMode Selection Switch Digital Output Connector Analog Output ConnectorPower and External Sync Connector Progressive ScanningElectronic Shutter Stand-by Image Shutter Video Internal Shutter Speed Control TM-1020 Series Internal Shutter Speed Control TM-1020 SeriesNo-Delay Shutter Internal Shutter Speed with Fast Mode TM-1020-15 only Internal Shutter Speed with Fast Mode TM-1020-15 onlyInternal Shutter Speed with Slow Mode TM-1020-15 Only Internal Shutter Speed with Slow Mode TM-1020-15 OnlyExternal Vinit with Pulse Width TM-1020-15 Only External Vinit with Pulse Width TM-1020-15 OnlyProgrammable Look-Up Table LUT and Knee Control CCD Output VoltageLook-Up Table External Sync and Pixel Locking Full Progressive ScanTwo-Row Binning Pixel Clock and Digital Data External Reset Timing Internal HD Async Shutter 0 Reset Timing Serial Communication Kit LVDS-Version Camera RS-232 Commands First Second Third Response Functions Character Symptom Non-synchronized Video Symptom No VideoSymptom Dark Video Information and Support Resources Resolution Power requirementWeight Power cableTM-1020 Series Progressive Scan Shutter Cameras 1 TM-1020 Series Physical Dimensions Physical Dimensions2 TM-1020 CL Series Physical Dimensions Spectral ResponseEmail imaging@jai.com