JAI TM-1020 operation manual Symptom No Video, Symptom Dark Video, Symptom Non-synchronized Video

Page 46

Page 36

TM-1020 Series Progressive Scan Shutter Cameras

5Troubleshooting

5.1Problems and Solutions

Following are troubleshooting tips for common problems. In general, problems can easily be solved by following these instructions. If the following remedies fail to offer a solution to your problems, please contact a JAI, Inc. representative.

5.1.1Symptom: No Video

Remedies: Check that the following are properly connected and operational.

•Power supplies

•Power cables

•Main power source

•Shutter control

•Async mode

•Lens

•Digital output cable

•Analog video cable

5.1.2Symptom: Dark Video

Remedies: Check that the following are properly connected and operational.

•Shutter selection

•Iris opening on the lens

5.1.3Symptom: Non-synchronized Video

Remedies: Check that the following are properly connected and operational.

•Proper mode output

•Frame grabber software camera selection

Troubleshooting

Image 46

Contents TM-1020 Series Progressive Scan Shutter Cameras Page CE Compliance JAI, IncPage Introduction Dynamic Range Control Problems and SolutionsSpecifications Scan ModesList of Tables List of Tables List of Figures List of Figures TM-1020 Series Progressive Scan Shutter Cameras Product DescriptionImager Miniature size and light weightAsynchronous reset Electronic shutterOutput WarrantyIntegration TM-1020 Series System Configuration Getting Started Unpacking Instructions Accessories and OptionsCamera Setup Heat Dissipation Components List2 a 12-Pin Connector LVDS/RS-422 version Connector Pin ConfigurationsPin Connector LVDS/RS-422 version Description 2 b 12-Pin Connector Camera Link Version Pin Connector CL Version DescriptionDigital Output Connector LVDS/RS-422 only Analog Output Connector Shutter Speed Control Dial Shutter Speed Control Dial LVDS/RS-422 version4 RS-232 Communication Cable LVDS/RS-422 version Manual AsyncDigital Output Cable LVDS/RS-422 version Digital Output Cable 30DG-02Camera Link Cable CL Versions Only Camera Link CablePower Supplies Power Supplies and Power Cable SetupJAI, Inc. Power Cables Attaching the Analog Video Output Building Your Own Power CableAttaching the Power Cable to the Connector 12P-02S Interface Cable Pin# Lead Color FunctionAttaching the Camera Lens 1 Up/Down Switch Mode Selection switch Shutter Speed Control switchMode Selection Switch Power and External Sync Connector Digital Output ConnectorAnalog Output Connector Progressive ScanningElectronic Shutter Stand-by Image Shutter Video Internal Shutter Speed Control TM-1020 Series Internal Shutter Speed Control TM-1020 SeriesNo-Delay Shutter Internal Shutter Speed with Fast Mode TM-1020-15 only Internal Shutter Speed with Fast Mode TM-1020-15 onlyInternal Shutter Speed with Slow Mode TM-1020-15 Only Internal Shutter Speed with Slow Mode TM-1020-15 OnlyExternal Vinit with Pulse Width TM-1020-15 Only External Vinit with Pulse Width TM-1020-15 OnlyProgrammable Look-Up Table LUT and Knee Control CCD Output VoltageLook-Up Table Two-Row Binning Full Progressive ScanExternal Sync and Pixel Locking Pixel Clock and Digital Data External Reset Timing Internal HD Async Shutter 0 Reset Timing Serial Communication Kit LVDS-Version Camera RS-232 Commands First Second Third Response Functions Character Symptom Dark Video Symptom No VideoSymptom Non-synchronized Video Information and Support Resources Weight ResolutionPower requirement Power cableTM-1020 Series Progressive Scan Shutter Cameras 1 TM-1020 Series Physical Dimensions Physical Dimensions2 TM-1020 CL Series Physical Dimensions Spectral ResponseEmail imaging@jai.com