JAI TM-1020 operation manual Mode Selection Switch

Page 17

TM-1020 Series Progressive Scan Shutter Cameras

3.1.6Mode Selection Switch

Various modes can be implemented with the rear panel Mode Selection switch. The Mode Selection switch works in conjunction with the Up/Down switch and RS-232 external control. Commands from the RS-232 interface will over-write the rear panel switch settings of the camera. The table below shows details on various modes.

TABLE 6. Mode Selection Switch

Mode Selection	Mode Information	Up/Down Switch	Functions
Switch Position
0	Normal Mode	Display Mode (D)
1	Set Gain	Up/Down	Change gain
2	Set Vtop (A/D)	Up/Down	Change A/D ref. top
3	Set Vbottom(A/D)	Up/Down	Change A/D ref. bottom
4	Gain Selection #1	Up: 9dB, Down: 12dB	Lower gain selection
5	Gain Selection #2	Up: 18dB, Down: 22dB	Higher gain selection
6	Linear LUT	Up: Linear, Down: LUT	Linear/LUT selection
7	Knee Selection	Up/Down (Scroll)	Scroll 10 different LUTs
8	Async Reset Mode	Up: Normal, Down:	Async and normal shut-
		Async	ter
9	Factory default Recall	Up/Down: Recall	Factory setting
A	Power up Setting	Up: Recall, Down: Save	Power up page setting
B	User Page Storage #1	Up: Recall, Down: Save	User page storage setting
C	User Page Storage #2	Up: Recall, Down: Save	User page storage setting
D	Direct Shutter Control	Up/Down	Shutter speed increment
			by 1H
E	Scan Format2	Up: Optional, Down:	Two-row binning selec-
		Binning	tion
F	Scan Format1	Up: Normal, Down:	Custom option scanning
		Normal

Operation