JAI TM-1020 operation manual Analog Output Connector

Page 9

TM-1020 Series Progressive Scan Shutter Cameras

The CL version has a 26-pin connector on the rear panel to output Camera Link data. The connector pin-out is shown in Table 4 on page 9.

13 1

	26			14
TABLE 4. Connector and Pin-out Configurations
			Camera Link Connector
Pin #		Description	I/O	Pin #	Description	I/O
1		GND		14	GND	(Shield)
2		Tx OUT 0-	Out	15	Tx OUT 0+	Out
3		Tx OUT 1-	Out	16	Tx OUT 1+	Out
4		Tx OUT 2-	Out	17	Tx OUT 2+	Out
5		Tx CLK OUT -	Out	18	Tx CLK OUT+	Out
6		Tx OUT 3-	Out	19	Tx OUT 3+	Out
7		SerTC+	In	20	SerTC-	In (LVDS/RS-422 or
						RS-232)
8		SerTFG-	Out	21	SerTFG+	Out
9		VINIT-	In	22	VINIT+	In
10		INTEG+	In	23	INTEG-	In
11		N/C		24	N/C
12		N/C		25	N/C
13		GND		26	GND
Note:	SerTC: Serial To Camera
	SerTFG: Serial to Frame Grabber

2.2.2 (d) Analog Output Connector

The TM-1020 series has a BNC connector on the rear panel to output analog video data. See Section 6.1, “Specifications,” on page 38 for additional information on analog video output.

Installation