JAI operation manual Internal Shutter Speed with Fast Mode TM-1020-15 only

Page 33

Page 23

TM-1020 Series Progressive Scan Shutter Cameras

Note: When the ROI function is not used, make sure that the INTEG/ROI inputs (#11 of 12-pin connector, #6 of the 31-pin connector, and #10 and #23 of the Camera Link connector) are kept open or logic high during Async. pulse width control mode.

3.6.3Internal Shutter Speed with Fast Mode (TM-1020-15 only)

FIGURE 12. Internal Shutter Speed with Fast Mode (TM-1020-15 only)

HD

VINIT

9H

FDV

32H

Discharge Pulse

Transfer Gate

X

S1 X = 1H

S2 X = 2H

S3 X = 4H

S4 X = 9H

The video signal has no delay from the reset timing. Shutter speed range is 1/2,400 to 1/31,000 sec. Select a dial switch setting from “1” to “4”. When the fast reset mode is selected, the camera resets with internal VINIT timing, which is latched to HD. Video output is also synchronized with internal VINIT timing without further delay. The shutter speed is controlled by the dial switch.

Operation

Image 33

Contents TM-1020 Series Progressive Scan Shutter Cameras Page JAI, Inc CE CompliancePage Introduction Specifications Problems and SolutionsDynamic Range Control Scan ModesList of Tables List of Tables List of Figures List of Figures Product Description TM-1020 Series Progressive Scan Shutter CamerasAsynchronous reset Miniature size and light weightImager Electronic shutterWarranty OutputIntegration TM-1020 Series System Configuration Camera Setup Heat Dissipation Accessories and OptionsGetting Started Unpacking Instructions Components ListConnector Pin Configurations 2 a 12-Pin Connector LVDS/RS-422 versionPin Connector LVDS/RS-422 version Description Pin Connector CL Version Description 2 b 12-Pin Connector Camera Link VersionDigital Output Connector LVDS/RS-422 only Analog Output Connector 4 RS-232 Communication Cable LVDS/RS-422 version Shutter Speed Control Dial LVDS/RS-422 versionShutter Speed Control Dial Manual AsyncDigital Output Cable 30DG-02 Digital Output Cable LVDS/RS-422 versionCamera Link Cable Camera Link Cable CL Versions OnlyPower Supplies and Power Cable Setup Power SuppliesJAI, Inc. Power Cables Attaching the Power Cable to the Connector Building Your Own Power CableAttaching the Analog Video Output 12P-02S Interface Cable Pin# Lead Color FunctionAttaching the Camera Lens Mode Selection switch Shutter Speed Control switch 1 Up/Down SwitchMode Selection Switch Analog Output Connector Digital Output ConnectorPower and External Sync Connector Progressive ScanningElectronic Shutter Stand-by Image Shutter Video Internal Shutter Speed Control TM-1020 Series Internal Shutter Speed Control TM-1020 SeriesNo-Delay Shutter Internal Shutter Speed with Fast Mode TM-1020-15 only Internal Shutter Speed with Fast Mode TM-1020-15 onlyInternal Shutter Speed with Slow Mode TM-1020-15 Only Internal Shutter Speed with Slow Mode TM-1020-15 OnlyExternal Vinit with Pulse Width TM-1020-15 Only External Vinit with Pulse Width TM-1020-15 OnlyCCD Output Voltage Programmable Look-Up Table LUT and Knee ControlLook-Up Table Full Progressive Scan Two-Row BinningExternal Sync and Pixel Locking Pixel Clock and Digital Data External Reset Timing Internal HD Async Shutter 0 Reset Timing Serial Communication Kit LVDS-Version Camera RS-232 Commands First Second Third Response Functions Character Symptom No Video Symptom Dark VideoSymptom Non-synchronized Video Information and Support Resources Power requirement ResolutionWeight Power cableTM-1020 Series Progressive Scan Shutter Cameras Physical Dimensions 1 TM-1020 Series Physical DimensionsSpectral Response 2 TM-1020 CL Series Physical DimensionsEmail imaging@jai.com