JAI TM-1020 operation manual Electronic Shutter

Page 29

Page 19

TM-1020 Series Progressive Scan Shutter Cameras

The TM-1020 series outputs the progressive-scanned image with an electronic shutter in two different formats:

1.Progressive-scanning digital and analog output

The CCD signal goes through A/D and D/A converters and through 10-bit in, 8-bit out look-up table (LUT).

The analog output is the same as 75Ω, 1Vp-p format available from BNC and 12-pin con- nector. The digital output is available from 31-pin connector (RS-422 or RS-644) or Camera Link connector.

2.Double-speed scanning output (display output)

By selection, the two-row binning mode puts double-speed video for monitor display. It repeats twice from one frame of input video. Refer to Section 3.8 on page 27 for infor- mation on scan modes.

3.4 Electronic Shutter

The TM-1020 series has a substrate drain-type shutter mechanism which provides a superb picture at various speeds without smearing. A built-in manual shutter speed control selects the electronic shutter rate of 1/60 (non-async mode only), 1/125, 1/250, 1/500, 1/1,000, 1/2,000, 1/4,000, 1/8,000, or 1/16,000 second.

With VINIT high (5V), the CCD keeps discharging. With a negative pulse to VINIT, the camera resets and purges the charge momentarily. Then it starts integrating for the period of shutter control set by either an external pulse width or internal shutter control. Progressive scanning permits a full 1000 lines of vertical resolution, as compared to a conventional CCD camera which captures only half the vertical lines per shutter.

3.5 Integration

The CCD imager of the TM-1020 series can be exposed for longer than the normal scan timing of 1/15 sec. This integration feature provides extra sensitivity for dark-environment applications. The progressive-scan imager permits a full frame of resolution in non-interlace format. Integration is achieved by controlling the #11 pin of the 12-pin connector to low (GND) or providing pulse-width control up to 1/15 frames. Please refer to Figure 2.2.2 on page 6 for pin-out information on the 12-pin connector.

Operation

Image 29
Contents TM-1020 Series Progressive Scan Shutter Cameras Page JAI, Inc CE CompliancePage Introduction Specifications Problems and SolutionsDynamic Range Control Scan ModesList of Tables List of Tables List of Figures List of Figures Product Description TM-1020 Series Progressive Scan Shutter CamerasAsynchronous reset Miniature size and light weightImager Electronic shutterIntegration WarrantyOutput TM-1020 Series System Configuration Camera Setup Heat Dissipation Accessories and OptionsGetting Started Unpacking Instructions Components ListPin Connector LVDS/RS-422 version Description Connector Pin Configurations2 a 12-Pin Connector LVDS/RS-422 version Pin Connector CL Version Description 2 b 12-Pin Connector Camera Link VersionDigital Output Connector LVDS/RS-422 only Analog Output Connector 4 RS-232 Communication Cable LVDS/RS-422 version Shutter Speed Control Dial LVDS/RS-422 versionShutter Speed Control Dial Manual AsyncDigital Output Cable 30DG-02 Digital Output Cable LVDS/RS-422 versionCamera Link Cable Camera Link Cable CL Versions OnlyJAI, Inc. Power Cables Power Supplies and Power Cable SetupPower Supplies Attaching the Power Cable to the Connector Building Your Own Power CableAttaching the Analog Video Output 12P-02S Interface Cable Pin# Lead Color FunctionAttaching the Camera Lens Mode Selection switch Shutter Speed Control switch 1 Up/Down SwitchMode Selection Switch Analog Output Connector Digital Output ConnectorPower and External Sync Connector Progressive ScanningElectronic Shutter Stand-by Image Shutter Video Internal Shutter Speed Control TM-1020 Series Internal Shutter Speed Control TM-1020 SeriesNo-Delay Shutter Internal Shutter Speed with Fast Mode TM-1020-15 only Internal Shutter Speed with Fast Mode TM-1020-15 onlyInternal Shutter Speed with Slow Mode TM-1020-15 Only Internal Shutter Speed with Slow Mode TM-1020-15 OnlyExternal Vinit with Pulse Width TM-1020-15 Only External Vinit with Pulse Width TM-1020-15 OnlyCCD Output Voltage Programmable Look-Up Table LUT and Knee ControlLook-Up Table External Sync and Pixel Locking Full Progressive ScanTwo-Row Binning Pixel Clock and Digital Data External Reset Timing Internal HD Async Shutter 0 Reset Timing Serial Communication Kit LVDS-Version Camera RS-232 Commands First Second Third Response Functions Character Symptom Non-synchronized Video Symptom No VideoSymptom Dark Video Information and Support Resources Power requirement ResolutionWeight Power cableTM-1020 Series Progressive Scan Shutter Cameras Physical Dimensions 1 TM-1020 Series Physical DimensionsSpectral Response 2 TM-1020 CL Series Physical DimensionsEmail imaging@jai.com