JAI TM-1020 operation manual 1 Up/Down Switch, Mode Selection switch Shutter Speed Control switch

Page 26

Page 16

TM-1020 Series Progressive Scan Shutter Cameras

3Operation

3.1Camera Rear Panel (LVDS/RS-422 Version)

Mode Selection switch

Shutter Speed

Control switch

8	9	01
			2
			3
7
	6
			4
		5

Up/Down switch

F0		12
E		3
D			4
C			4
B		6	5
A		6
9		7
9	8

SHUTTER MODE DOWN

Digital Output connector

DIGITAL

Power, RS-232, and External Sync Connector

1 9

28

10

3 11 12 7

4 5 6

Analog Output connector

POWER VIDEO

3.1.1Up/Down Switch

The Mode Selection switch works in conjunction with the Up/Down switch. Refer to Table 6 above for information on the Up/Down switch.

3.1.2Digital Output Connector

Refer to Section 2.2.5 on page 11 for information on the digital output connector.

3.1.3Analog Output Connector

The LVDS-version cameras has a BNC connector on the rear panel to output analog video data.

3.1.4Power, RS-232, and External Sync Connector

Refer to Section 2.2.2 (a on page 6 for information on the power, RS-232, and external sync connector.

3.1.5Shutter Speed Control Switch

Please refer to Section 2.2.3 on page 10 for information on the Shutter Speed Control dial. The factory default settings correspond to the shutter speeds as shown in Table 5 on page 10.

Operation

Image 26

Contents TM-1020 Series Progressive Scan Shutter Cameras Page CE Compliance JAI, IncPage Introduction Dynamic Range Control Problems and SolutionsSpecifications Scan ModesList of Tables List of Tables List of Figures List of Figures TM-1020 Series Progressive Scan Shutter Cameras Product DescriptionImager Miniature size and light weightAsynchronous reset Electronic shutterIntegration WarrantyOutput TM-1020 Series System Configuration Getting Started Unpacking Instructions Accessories and OptionsCamera Setup Heat Dissipation Components ListPin Connector LVDS/RS-422 version Description Connector Pin Configurations2 a 12-Pin Connector LVDS/RS-422 version 2 b 12-Pin Connector Camera Link Version Pin Connector CL Version DescriptionDigital Output Connector LVDS/RS-422 only Analog Output Connector Shutter Speed Control Dial Shutter Speed Control Dial LVDS/RS-422 version4 RS-232 Communication Cable LVDS/RS-422 version Manual AsyncDigital Output Cable LVDS/RS-422 version Digital Output Cable 30DG-02Camera Link Cable CL Versions Only Camera Link CableJAI, Inc. Power Cables Power Supplies and Power Cable SetupPower Supplies Attaching the Analog Video Output Building Your Own Power CableAttaching the Power Cable to the Connector 12P-02S Interface Cable Pin# Lead Color FunctionAttaching the Camera Lens 1 Up/Down Switch Mode Selection switch Shutter Speed Control switchMode Selection Switch Power and External Sync Connector Digital Output ConnectorAnalog Output Connector Progressive ScanningElectronic Shutter Stand-by Image Shutter Video Internal Shutter Speed Control TM-1020 Series Internal Shutter Speed Control TM-1020 SeriesNo-Delay Shutter Internal Shutter Speed with Fast Mode TM-1020-15 only Internal Shutter Speed with Fast Mode TM-1020-15 onlyInternal Shutter Speed with Slow Mode TM-1020-15 Only Internal Shutter Speed with Slow Mode TM-1020-15 OnlyExternal Vinit with Pulse Width TM-1020-15 Only External Vinit with Pulse Width TM-1020-15 OnlyProgrammable Look-Up Table LUT and Knee Control CCD Output VoltageLook-Up Table External Sync and Pixel Locking Full Progressive ScanTwo-Row Binning Pixel Clock and Digital Data External Reset Timing Internal HD Async Shutter 0 Reset Timing Serial Communication Kit LVDS-Version Camera RS-232 Commands First Second Third Response Functions Character Symptom Non-synchronized Video Symptom No VideoSymptom Dark Video Information and Support Resources Weight ResolutionPower requirement Power cableTM-1020 Series Progressive Scan Shutter Cameras 1 TM-1020 Series Physical Dimensions Physical Dimensions2 TM-1020 CL Series Physical Dimensions Spectral ResponseEmail imaging@jai.com