JAI TM-1020 Connector Pin Configurations, 2 a 12-Pin Connector LVDS/RS-422 version

Page 16

Page 6

TM-1020 Series Progressive Scan Shutter Cameras

For optimal performance, JAI, Inc. recommends using a cooling fan to set up a positive air flow around the camera and following the precautions below.

•Mount the camera on a large heat sink (camera bracket) made out of conductive material like alu- minum.

•Make sure the flow of heat from the camera case to the bracket is not blocked by a non-conductive material like plastic.

•Make sure the camera has enough open space around it to facilitate the free flow of air.

Please contact JAI, Inc. at (800) 445-5444 or send an email to imaging@jai.com if you have any questions.

2.2.2Connector Pin Configurations

2.2.2 (a) 12-Pin Connector (LVDS/RS-422 version)

The TM-1020 series has a 12-pin Hirose connector for power input, serial communication, and signal integration. Pin #1 is Ground and Pin #2 is +12V DC. Other pins handle a number of input and output functions, as shown in Table 1 below.

1 9

28

10

3

11

12

7

4 5 6

TABLE 1. 12-Pin Connector (LVDS/RS-422 version)

Pin	Description	Pin	Description

1	GND (power)	7	VD In

2	+12V DC	8	Strobe Out

3	GND (analog)	9	HD In

4	Video Out	10	RXD (RS-232)

5	GND (digital)	11	Integration Control

6	VINIT In	12	TXD (RS-232)

Installation

Image 16

Contents TM-1020 Series Progressive Scan Shutter Cameras Page CE Compliance JAI, IncPage Introduction Problems and Solutions SpecificationsDynamic Range Control Scan ModesList of Tables List of Tables List of Figures List of Figures TM-1020 Series Progressive Scan Shutter Cameras Product DescriptionMiniature size and light weight Asynchronous resetImager Electronic shutterOutput WarrantyIntegration TM-1020 Series System Configuration Accessories and Options Camera Setup Heat DissipationGetting Started Unpacking Instructions Components List2 a 12-Pin Connector LVDS/RS-422 version Connector Pin ConfigurationsPin Connector LVDS/RS-422 version Description 2 b 12-Pin Connector Camera Link Version Pin Connector CL Version DescriptionDigital Output Connector LVDS/RS-422 only Analog Output Connector Shutter Speed Control Dial LVDS/RS-422 version 4 RS-232 Communication Cable LVDS/RS-422 versionShutter Speed Control Dial Manual AsyncDigital Output Cable LVDS/RS-422 version Digital Output Cable 30DG-02Camera Link Cable CL Versions Only Camera Link CablePower Supplies Power Supplies and Power Cable SetupJAI, Inc. Power Cables Building Your Own Power Cable Attaching the Power Cable to the ConnectorAttaching the Analog Video Output 12P-02S Interface Cable Pin# Lead Color FunctionAttaching the Camera Lens 1 Up/Down Switch Mode Selection switch Shutter Speed Control switchMode Selection Switch Digital Output Connector Analog Output ConnectorPower and External Sync Connector Progressive ScanningElectronic Shutter Stand-by Image Shutter Video Internal Shutter Speed Control TM-1020 Series Internal Shutter Speed Control TM-1020 SeriesNo-Delay Shutter Internal Shutter Speed with Fast Mode TM-1020-15 only Internal Shutter Speed with Fast Mode TM-1020-15 onlyInternal Shutter Speed with Slow Mode TM-1020-15 Only Internal Shutter Speed with Slow Mode TM-1020-15 OnlyExternal Vinit with Pulse Width TM-1020-15 Only External Vinit with Pulse Width TM-1020-15 OnlyProgrammable Look-Up Table LUT and Knee Control CCD Output VoltageLook-Up Table Two-Row Binning Full Progressive ScanExternal Sync and Pixel Locking Pixel Clock and Digital Data External Reset Timing Internal HD Async Shutter 0 Reset Timing Serial Communication Kit LVDS-Version Camera RS-232 Commands First Second Third Response Functions Character Symptom Dark Video Symptom No VideoSymptom Non-synchronized Video Information and Support Resources Resolution Power requirementWeight Power cableTM-1020 Series Progressive Scan Shutter Cameras 1 TM-1020 Series Physical Dimensions Physical Dimensions2 TM-1020 CL Series Physical Dimensions Spectral ResponseEmail imaging@jai.com