JAI TM-1020 operation manual Stand-by Image Shutter Video

Page 30

Page 20

TM-1020 Series Progressive Scan Shutter Cameras

3.6 Asynchronous Reset

ASYNC RESET

VINIT

VD

SG (TRANSFER GATE)

DISCHARGE PULSE

PROGRESSIVE OUTPUT

VIDEO

Stand-by Image

Shutter Video

Stand-by Image

The TM-1020 series's asynchronous reset is flexible and accepts external horizontal drive (HD) for phase locking. When the VINIT pulse is applied, it resets the camera's scanning and purging of the CCD. For asynchronous image capturing by frame grabbers, it outputs single FDV at async reset. For the TM-1020-15 and -15CL versions, there are three modes to control the asynchronous reset and shutter speed:

•Internal Shutter Speed with Fast Mode

•Internal Shutter Speed with Slow Mode

•External VINIT with Pulse Width

For the entire line of TM-1020 series cameras except the -15 and -15CL models, there are two modes to control the asynchronous reset and shutter speed:

•Internal Shutter Speed Control

•External VINIT with Pulse Width

Operation

Image 30

Contents TM-1020 Series Progressive Scan Shutter Cameras Page CE Compliance JAI, IncPage Introduction Dynamic Range Control Problems and SolutionsSpecifications Scan ModesList of Tables List of Tables List of Figures List of Figures TM-1020 Series Progressive Scan Shutter Cameras Product DescriptionImager Miniature size and light weightAsynchronous reset Electronic shutterWarranty OutputIntegration TM-1020 Series System Configuration Getting Started Unpacking Instructions Accessories and OptionsCamera Setup Heat Dissipation Components ListConnector Pin Configurations 2 a 12-Pin Connector LVDS/RS-422 versionPin Connector LVDS/RS-422 version Description 2 b 12-Pin Connector Camera Link Version Pin Connector CL Version DescriptionDigital Output Connector LVDS/RS-422 only Analog Output Connector Shutter Speed Control Dial Shutter Speed Control Dial LVDS/RS-422 version4 RS-232 Communication Cable LVDS/RS-422 version Manual AsyncDigital Output Cable LVDS/RS-422 version Digital Output Cable 30DG-02Camera Link Cable CL Versions Only Camera Link CablePower Supplies and Power Cable Setup Power SuppliesJAI, Inc. Power Cables Attaching the Analog Video Output Building Your Own Power CableAttaching the Power Cable to the Connector 12P-02S Interface Cable Pin# Lead Color FunctionAttaching the Camera Lens 1 Up/Down Switch Mode Selection switch Shutter Speed Control switchMode Selection Switch Power and External Sync Connector Digital Output ConnectorAnalog Output Connector Progressive ScanningElectronic Shutter Stand-by Image Shutter Video Internal Shutter Speed Control TM-1020 Series Internal Shutter Speed Control TM-1020 SeriesNo-Delay Shutter Internal Shutter Speed with Fast Mode TM-1020-15 only Internal Shutter Speed with Fast Mode TM-1020-15 onlyInternal Shutter Speed with Slow Mode TM-1020-15 Only Internal Shutter Speed with Slow Mode TM-1020-15 OnlyExternal Vinit with Pulse Width TM-1020-15 Only External Vinit with Pulse Width TM-1020-15 OnlyProgrammable Look-Up Table LUT and Knee Control CCD Output VoltageLook-Up Table Full Progressive Scan Two-Row BinningExternal Sync and Pixel Locking Pixel Clock and Digital Data External Reset Timing Internal HD Async Shutter 0 Reset Timing Serial Communication Kit LVDS-Version Camera RS-232 Commands First Second Third Response Functions Character Symptom No Video Symptom Dark VideoSymptom Non-synchronized Video Information and Support Resources Weight ResolutionPower requirement Power cableTM-1020 Series Progressive Scan Shutter Cameras 1 TM-1020 Series Physical Dimensions Physical Dimensions2 TM-1020 CL Series Physical Dimensions Spectral ResponseEmail imaging@jai.com