Sanyo VCC-N6695P Network Settings, Check the setting details, and then click the OK button

Network Settings

1

Network Settings

Set the TCP/IP settings in accordance with the operating system of the computer being used.

☞The screens below explain the procedure when using Windows Vista.

If using Windows XP, click [Start] → [Control Panel] → [Network & Internet Connections], and then click [Network Connections], and then proceed to step 3.

1 Click [Start] → [Control Panel] →

[Network and Sharing Center], and then click [Network Connections].

2 Click [Manage Network Connections].

3 Right-click the icon for the LAN card (Ethernet adapter) you are using, and then select “Properties” from the menu.

☞If accessing the camera via UPnP (Universal Plug and Play), check the electronic manual on the included CD-ROM.

4 In “This connection uses the following items”, select “Internet Protocol Version 4 (TCP/IPv4)”, and then click Properties.

•For Windows XP, select “Internet protocol (TCP/IP)”.

5 Select “Use the following IP address”, and then enter the IP address, subnet mask and gateway.

If the camera’s IP address is the default address (192.168.0.2), enter “192.168.0.xxx”. For “xxx”, enter a value which does not overlap with the value for any other computer or network device on the network, or which is not within the range of IP addresses assigned by DHCP server.

6 Check the setting details, and then click the OK button.

12