Sanyo VCC-N6695P Viewing Live Images on a Monitor Basic Connections, Monitor Connection

Viewing Live Images on a Monitor (Basic Connections)

All the power supplied to the system should be turned off when you connect devices.

Monitor Connection

Using different cables from those specified here may attenuate the video and/or sync signals and interfere with correct transmission.

Thicker than RG-6U (5C-2V): 500 m / 547 yds. max.

(Non-PoE power supply)

Power Supply Connection

To prevent a fire hazard use any UL listed wire rated VW-1.

11

~ AC 24V ~

GND	POWER	VIDEO OUT	ALARM OUT
			ALARM IN
DC12V	AC24V

-- --

COM

Check that +/– polarity is correct.

+

DC 12V –

11

LAN

LINK

CLASS 2 WIRING

11 Thicker than 18 AWG Thicker than 24 AWG, 600 m / 656 yds. max.

Alarm Signal Output

If a lamp is connected to this cable, it will light up when an alarm signal is received or when the built-in motion sensor detects movement.

External	(ALARM OUT)
peripheral
	(COM)
equipment

•To use the ALARM OUT setting, you must make the appropriate ALARM OUT settings for CAMERA SETTINGS in the network settings.

	Alarm Signal Input
Alarm	(ALARM IN)
input	(COM)
signal

•To use the ALARM IN setting, you must make the appropriate ALARM IN settings for CAMERA SETTINGS in the network settings.

6