Configuration with the CCIC1410 Homepage
The accessibility of the RTSP streaming for the three authentication modes is listed in the following table:
O indicates that the authentication mode is supported by the RTSP player.
X indicates that the authentication mode is NOT supported by the RTSP player.
Access name for stream 1 / Access name for stream 2:
The access name is used to select the streaming source. When using an RTSP player to access the network camera, and the video mode is set to MPEG4, use the following RTSP URL command to request a transmission of streaming data: rtsp://<ip address>:<rtsp port>/<access name for stream1 or stream2>
For example, when the access name for stream 1 is set to live.sdp:
1.Launch an RTSP player.
2.Choose File > Open URL.
ÎAn URL dialog box will pop up.
3.Type in the URL command in the text box. For example: rtsp://192.168.5.129:554/live.sdp
ÎThe live video will be displayed on your player.
RTSP port /RTP port for video, audio/ RTCP port for video, audio
The RTSP
The RTP
The five ports can be changed between 1025 and 65535. The RTP port must be
If the RTP ports are incorrectly assigned, a warning message is displayed.
58
Siemens Building Technologies |
|
Fire Safety & Security Products | 05.2009 |