Safety
Radio interference with other devices in the environment
zIn France, it is not allowed to use the
zThe unit operates on frequencies that are approved for use in the European Union. When used outside the EU, the national regulations for the use of frequencies must be observed.
Damage due to unsuitable mounting location
zThe environmental conditions recommended by the manufacturer must be observed.
zDo not operate the device close to sources of powerful electromagnetic radiation.
zDo not operate the device in dusty places.
zThe device should only be used for indoor applications.
zDo not expose the device to mechanical vibrations or shocks.
zProtect the device against moisture.
Danger of electrical shock due to incorrect connection
zConnect the device only to a limited power source.
zThis device is designed to work with 5 V
Risk of cable damage due to stress
zMake sure that all outgoing cables and wires are sufficiently
zMake sure that cables are not under stress, kinked or damaged.
1.2.3Service and maintenance
zDo not attempt to service or modify this device yourself. Refer this work to qualified service personnel.
1.2.4Cleaning of the device
Do not touch the imaging surface of the sensor. Use a soft cloth moistened with alcohol to clean the surface if it is touched accidentally.
1.2.5Software
Damage during transport
zAlways transport the CD in the case it originally came in.
Data loss after software update
zMake sure to backup all data before updating the software.
Damage due to improper handling
zProtect the CD from scratching.
zTo clean the CD use a soft dry cloth.
6
Siemens Building Technologies |
|
Fire Safety & Security Products | 05.2009 |