Siemens CCIC1410 configurationmanual Media Type Snapshot, Video clip

Configuration with the CCIC1410 Homepage

zMedia Type:

–Snapshot:

Select to send snapshots when a trigger is activated.

ÎSource:

Select whether to use snapshots from stream 1 or stream 2.

ÎSend pre-event images:

The network camera has a buffer area; it temporarily holds data up to a certain limit. Specify how many images are to be captured before a trigger is activated. Up to seven images can be generated.

ÎSend post-event images:

Specify how many images are to be captured after a trigger is activated. Up to seven images can be generated. For example, if both the Send pre-event images and Send post-event images are set to seven, a total of 15 images are generated after a trigger is activated.

–Video clip:

Select to send video clips when a trigger is activated.

ÎSource:

Select whether to record video clips from stream 1 or stream 2.

ÎPre-event recording:

The network camera has a buffer area; it temporarily holds data up to a certain limit. Specify for how many seconds video clips are to be recorded before a trigger is activated. Up to nine seconds can be set.

ÎMaximum duration:

Specify the maximum recording duration in seconds. Up to ten seconds can be set. For example, if the pre-event recording is set to five seconds and the maximum duration is set to ten seconds, the network camera continues to record for another four seconds after a trigger is activated.

78

Siemens Building Technologies
Fire Safety & Security Products	05.2009