
Configuration with the CCIC1410 Homepage
Enable UPnP port | To access the network camera from the |
forwarding | Internet, select this option to allow the network |
| camera to open ports on the router |
| automatically so that video streams can be |
| sent out from a LAN. To utilize this feature, |
| make sure that your router supports UPnP™ |
| and it is activated. |
PPPoE PPPoE | |
Select this option to configure your network camera to make it accessible | |
from anywhere as long as there is an Internet connection. Note that to | |
utilize this feature, it requires an account provided by your ISP. |
Proceed as follows to acquire your network camera’s public IP address.
1.Set up the network camera in LAN.
2.Go to Configuration > Application > Server Settings (please refer to Server Settings in chapter 9.13 Application settings) to add a new server
3.Go to Configuration > Application > Media Settings (please refer to Media Settings in chapter 9.13 Application settings). Select System log so that you will receive a list of system logs in TXT file format containing the network camera’s public IP address on your email or FTP server.
4.Go to Configuration > Network > Network Type. Select PPPoE and enter the user name and password provided by your ISP. Click Save for your changes to take effect.
5.The network camera starts to reboot.
NOTE:
If the default ports are already used by other devices connecting to the same router, the network camera will select other ports.
If UPnP™ is not supported by your router, you will see the following message:
Error: Router does not support UPnP forwarding.
54
Siemens Building Technologies |
|
Fire Safety & Security Products | 05.2009 |