Siemens CCIC1410 Power line frequency, Video orientation, Maximum exposure time, Image Settings

Page 66

Configuration with the CCIC1410 Homepage

Power line frequency:

Select the appropriate power line frequency for your location to eliminate image flickering. Note that after the power line frequency is changed, it is required to disconnect and reconnect the power cord of the network camera in order for the new setting to take effect.

Video orientation:

"Flip" vertically reflects the display of the live video. "Mirror" horizontally reflects the display of the live video. Select both options if the network camera is installed upside-down (e.g. on a ceiling) to correct the image orientation.

Maximum exposure time:

1/30 S, 1/15 S, and Auto.

Overlay title and time stamp on video:

Select this option to insert the video title and time in the video stream. Note that when the image size is set to 176 x 144, only the time will be stamped on video streams.

Image Settings

Click Image Settings to open the image settings page. In this page, you can fine- tune white balance, brightness, saturation, contrast, and sharpness for video compensation.

–	Brightness:
	Adjust the image brightness level, which ranges from -5 to +5. The default value
	is set to 0.
66

Siemens Building Technologies
Fire Safety & Security Products	05.2009

Image 66

Contents Mjpeg / MPEG4 Contacting us About this documentTrademarks Training coursesContents 11.1 Installation of the device SafetyGeneral safety precautions Target readersService and maintenance Cleaning of the deviceSoftware Meaning of the written warning notices Cmos characteristicsMeaning of the hazard symbols Damage due to improper storage of CDDirectives and standards For CCIC1410-L and CCIC1410-LAFor CCIC1410-LAW National restrictions Restrictions for FranceDeclaration of conformity Specification CCIC1410-L Image system Technical dataDimensions Product specifications ElectronicsNetwork ConnectorPower supply EnvironmentPackage contents Ordering dataDescription of the equipment Versions of the cameraFront and rear views of the camera Pin definitions of input/output only CCIC1410-LA, -LAWConnection method LED statusHardware reset RebootRestore Installation Network setupInternet connection via a router Internet connection with static IP Internet connection via PPPoE Point-to-Point over EthernetCCIC1410 Installation Wizard Set up the CCIC1410 Installation WizardCCIC1410 Installation Wizard Open the CCIC1410 Installation Wizard User interface of the CCIC1410 Installation Wizard Select a device for the configurationSystem settings Open the system settingsRefreshing the device list and linking to the devices Change administrator password Change host nameNetwork settings Adjust date and timePPPoE setting LAN setting Dhcp or fixed IP Wireless setting Mobile accessWireless Settings page appears Wireless mode Auth. Mode NoneKey length Key format Hexadecimal or AsciiApply settings to selected device Access via Internet Access informationAccess from Home Access from Quicktime/CellphoneUPnP status Wireless statusNetwork type Ddns statusAdd to my favorite MPEG4 media options Client settingsStream options MPEG4 protocol options transmission modesUDP multicast 4 MP4 saving options storing destination and file nameUDP unicast File name prefixAdd date and time suffix to the file name Using your Web Browser Configuration with the CCIC1410 HomepageUsing the CCIC1410 Installation Wizard Opening the CCIC1410 HomepageUser interface of the CCIC1410 Homepage Tabs of the CCIC1410 Homepage Live video window of CCIC1410 Homepage with MPEG4 mode Live video window of the CCIC1410 HomepageVideo and audio control buttons Digital zoom edit VolumeVolume at your local computer Start / Stop recordingLive video window of CCIC1410 Homepage with Mjpeg mode Mjpeg protocol and media optionsSystem Settings for network cameraTurn off the LED indicator Host name name for the network cameraDisable privacy button Time zone of system system timeDaylight saving time Mark the checkbox Enable daylight saving time Option DescriptionDigital input and digital output Root password SecurityAdd users Manage users Network connection settings Network typeEnable UPnP port ForwardingPPPoE PPPoE Point-to-point protocol over Ethernet Primary stream port / Secondary stream port AuthenticationHttp Stream name3 FTP Rtsp streaming Access name for stream 1 / Access name for stream Wireless LAN settings CCIC1410-LAW only Ssid Service Set IdentifierTX rate Wireless modeChannel SecurityDefault Key Network Key Security WEP Wired equivalent PrivacyAuthentication mode Key formatPre-shared Key WPA-PSKAlgorithm WPA2-PSKEnable Ddns Ddns settingsAccess list ProviderAllowed List and Denied List Delete allowed list / Delete denied listDenied List section Audio and video settings Video settingsColour Video orientation Power line frequencyImage Settings Maximum exposure timePrivacy mask Video quality settings for stream 1 / stream Jpeg MPEG-4 Audio settings Internal microphone input gainAudio type Motion detection settings Enable motion detection Application settings Event settings Event nameTrigger Event ScheduleMedia Settings Media nameMedia Type Snapshot Video clipServer settings System logServer name Server Type MailAlarm server System logRemote log View parameters Current logMaintenance RebootRestore Upload / export daylight saving time configuration file Export daylight saving time configuration fileConfiguration with the CCIC1410 Homepage Upload Daylight Saving Time Configuration File Using Rtsp players Accessing the video streamsVia the CCIC1410 Installation Wizard Via InternetViewing Mjpeg streaming media Http//ipaddress80/ cgi-bin/liveimageUsing 3GPP-compatible mobile devices Video ModeUpgrade firmware Using the CCIC1410 HomepageUsing the CCIC1410 Installation Wizard Upgrade firmware Upgrade firmware Upgrade firmware Index Fixed ~Page A6V10236594