Siemens CCIC1410 configurationmanual Privacy mask

Configuration with the CCIC1410 Homepage

–Saturation:

Adjust the image saturation level, which ranges from -5 to +5. The default value is set to 0.

–Contrast:

Adjust the image contrast level, which ranges from -5 to +5. The default value is set to 0.

–Sharpness:

Adjust the image sharpness level, which ranges from -3 to +3. The default value is set to +3.

–White balance:

Adjust the value for best colour temperature. "Auto" – The network camera automatically adjusts the colour temperature of light according to the light source. The white balance setting defaults to "Auto" and works well in most situations.

Keep current value. Proceed as follows to manually set the white balance to compensate for the ambient lighting conditions.

1.Set the white balance to "Auto" and click Save.

2.Place a sheet of white paper in front of the lens; then allow the network camera to adjust the colour temperature automatically.

3.Select "Keep current value" to confirm the setting while the white balance is being measured.

4.Click Save for the setting to take effect.

Privacy mask

Click Privacy Mask to open the privacy mask page. In this page, you can mask out sensitive zones for privacy concerns.

To set the privacy mask windows, proceed as follows:

1.	Click New to add a new window.
2.	You can resize and drag-drop the window, which should be at least twice the
	size of the object (height and width) you want to cover.
3.	Enter a descriptive window name and click Save for the settings to take effect.
4.	Select Enable privacy mask to enable this function.
	67
Siemens Building Technologies
Fire Safety & Security Products	05.2009