Siemens CCIC1410 Wireless mode, Channel, TX rate, Security None No data encryption

Page 60

Configuration with the CCIC1410 Homepage

Wireless mode:

Click on the pull-down menu to select from the following options:

zInfrastructure:

The network camera is connected to the WLAN via an Access Point (default setting).

zAd-Hoc:

The network camera is connected directly to a host equipped with a wireless adapter in a peer-to-peer environment.

Channel:

While in infrastructure mode, the channel is selected automatically to match the channel setting for the selected Access Point. In Ad-Hoc mode, the channel must be manually set to the same channel for each wireless adapter. The default channel setting depends on the regional settings.

TX rate:

This field is for selecting the maximum transmission rate on the network. The default setting is “Auto”, which means that the network camera will try to connect to the other wireless device at highest transmission rate.

Security:

Select the data encrypt method. There are four types from low to high: none, WEP,

WPA-PSK, and WPA2-PSK.

zSecurity: None: No data encryption.

60

Siemens Building Technologies
Fire Safety & Security Products	05.2009

Image 60

Contents Mjpeg / MPEG4 About this document TrademarksContacting us Training coursesContents 11.1 Safety General safety precautionsInstallation of the device Target readersService and maintenance Cleaning of the deviceSoftware Cmos characteristics Meaning of the hazard symbolsMeaning of the written warning notices Damage due to improper storage of CDDirectives and standards For CCIC1410-L and CCIC1410-LAFor CCIC1410-LAW National restrictions Restrictions for FranceDeclaration of conformity Technical data Dimensions Product specificationsSpecification CCIC1410-L Image system ElectronicsConnector Power supplyNetwork EnvironmentPackage contents Ordering dataDescription of the equipment Versions of the cameraFront and rear views of the camera Pin definitions of input/output only CCIC1410-LA, -LAWConnection method LED statusHardware reset RebootRestore Installation Network setupInternet connection via a router Internet connection with static IP Internet connection via PPPoE Point-to-Point over EthernetCCIC1410 Installation Wizard Set up the CCIC1410 Installation WizardCCIC1410 Installation Wizard Open the CCIC1410 Installation Wizard User interface of the CCIC1410 Installation Wizard Select a device for the configurationSystem settings Open the system settingsRefreshing the device list and linking to the devices Change administrator password Change host nameNetwork settings Adjust date and timePPPoE setting LAN setting Dhcp or fixed IP Wireless setting Mobile accessWireless Settings page appears Wireless mode Auth. Mode NoneKey length Key format Hexadecimal or AsciiApply settings to selected device Access information Access from HomeAccess via Internet Access from Quicktime/CellphoneWireless status Network typeUPnP status Ddns statusAdd to my favorite Client settings Stream optionsMPEG4 media options MPEG4 protocol options transmission modes4 MP4 saving options storing destination and file name UDP unicastUDP multicast File name prefixAdd date and time suffix to the file name Configuration with the CCIC1410 Homepage Using the CCIC1410 Installation WizardUsing your Web Browser Opening the CCIC1410 HomepageUser interface of the CCIC1410 Homepage Tabs of the CCIC1410 Homepage Live video window of CCIC1410 Homepage with MPEG4 mode Live video window of the CCIC1410 HomepageVolume Volume at your local computerVideo and audio control buttons Digital zoom edit Start / Stop recordingLive video window of CCIC1410 Homepage with Mjpeg mode Mjpeg protocol and media optionsSettings for network camera Turn off the LED indicatorSystem Host name name for the network cameraDisable privacy button Time zone of system system timeDaylight saving time Mark the checkbox Enable daylight saving time Option DescriptionDigital input and digital output Root password SecurityAdd users Manage users Network connection settings Network typeEnable UPnP port ForwardingPPPoE PPPoE Point-to-point protocol over Ethernet Authentication HttpPrimary stream port / Secondary stream port Stream name3 FTP Rtsp streaming Access name for stream 1 / Access name for stream Wireless LAN settings CCIC1410-LAW only Ssid Service Set IdentifierWireless mode ChannelTX rate SecuritySecurity WEP Wired equivalent Privacy Authentication modeDefault Key Network Key Key formatWPA-PSK AlgorithmPre-shared Key WPA2-PSKDdns settings Access listEnable Ddns ProviderAllowed List and Denied List Delete allowed list / Delete denied listDenied List section Audio and video settings Video settingsColour Power line frequency Image SettingsVideo orientation Maximum exposure timePrivacy mask Video quality settings for stream 1 / stream Jpeg MPEG-4 Audio settings Internal microphone input gainAudio type Motion detection settings Enable motion detection Application settings Event settings Event nameTrigger Event ScheduleMedia Settings Media nameMedia Type Snapshot Video clipServer settings System logServer name Server Type MailAlarm server System logRemote log View parameters Current logMaintenance RebootRestore Upload / export daylight saving time configuration file Export daylight saving time configuration fileConfiguration with the CCIC1410 Homepage Upload Daylight Saving Time Configuration File Accessing the video streams Via the CCIC1410 Installation WizardUsing Rtsp players Via InternetViewing Mjpeg streaming media Http//ipaddress80/ cgi-bin/liveimageUsing 3GPP-compatible mobile devices Video ModeUpgrade firmware Using the CCIC1410 HomepageUsing the CCIC1410 Installation Wizard Upgrade firmware Upgrade firmware Upgrade firmware Index Fixed ~Page A6V10236594