Siemens CCIC1410 configurationmanual System log, Server settings

Configuration with the CCIC1410 Homepage

NOTE

The maximum duration depends on the selected encoder for the source (MPEG-4 / MJPEG), the selected quality settings, and the maximum file size. Apart from the max. duration setting, please check the actual duration based on the source settings.

–System log:

Select to send a system log when a trigger is activated.

When completed, click Save for your settings to take effect and then click Close to exit this page. The new media name will appear in the media drop-down list on the Application page as below. To remove a media setting from the list, select a media name from the drop-down list and then click Delete. Note that an event setting can only be deleted when the media setting is not linked to an event.

Server settings

In the Server settings section, click Add to open the server setting page.

In this page, you can specify where the notification messages will be sent when a trigger is activated. A total of five server settings can be configured.

	79
Siemens Building Technologies
Fire Safety & Security Products	05.2009