Siemens CCIC1410 configurationmanual Event settings, Event name

Configuration with the CCIC1410 Homepage

Event settings

In the Event settings section, click Add to open the event setting page.

In this page, you can arrange the three elements – Trigger, Schedule and Action – to configure an event. A total of three event settings can be configured.

z Event name:

Enter a descriptive name for the event.

– Enable this event:

Select this option to enable this event.

– Priority:

Select the relative importance of this event (High, Normal, and Low). Events with higher priority setting will be executed first.

– Detect next after …… second(s):

Enter the duration in seconds for which motion detection is to be paused after a motion has been detected.

	An event is an action initiated by a user-defined trigger source; it is the causal
	arrangement of the following three elements:
	Î Trigger
	Î Event Schedule
	Î Action
	75
Siemens Building Technologies
Fire Safety & Security Products	05.2009