Siemens CCIC1410 configurationmanual Video quality settings for stream 1 / stream

Configuration with the CCIC1410 Homepage

NOTE

Up to 5 privacy mask windows can be set in the same screen.

If you want to delete a window, click on the ‘x’ in the upper right-hand corner of the window to close the window.

Video quality settings for stream 1 / stream 2:

You can set up two separate streams for the network camera for different viewing devices. For example, set the network camera to a smaller image size and a lower bit rate for remote viewing on mobile phones. Or, set the network camera to a larger video size and a higher bit rate for live viewing on web browsers.

–Mode:

The network camera offers two video compression standards for real-time viewing: MPEG4 and MJPEG.

If MPEG4 mode is selected, it is streamed in RTSP protocol. There are four parameters provided in MPEG-4 mode for video performance adjustment.

–Frame size:

Select the video size. Note that a larger image size takes up more bandwidth. The image sizes are selectable in the following resolutions: 176 x 144, 352 x 240 and 640 x 480.

–Maximum frame rate:

This limits the maximum frame refresh rate per second. Set the image rate higher for a smoother video quality.

If the power line frequency is set to 50 Hz, the image rates are selectable at the following rates: 1 ips, 2 ips, 3 ips, 5 ips, 8 ips, 10 ips, 15 ips, 20 ips and 25 ips. If the power line frequency is set to 60 Hz, the image rates are selectable at the following rates: 1 ips, 2 ips, 3 ips, 5 ips, 8 ips, 10 ips, 15 ips, 20 ips, 25 ips and 30 ips.

–Intra frame period:

Determine how often to send an I-frame. The shorter the duration, the more likely you will get a better video quality, but at the cost of higher network bandwidth consumption. Select the intra frame period from the following values: 1/4 second, 1/2 second, 1 second, 2 seconds, 3 seconds and 4 seconds.

68

Siemens Building Technologies
Fire Safety & Security Products	05.2009