Siemens CCIC1410 configurationmanual Hardware reset, Reboot, Restore

Page 17

Description of the equipment

6.6Hardware reset

There is a reset button on the back cover of the network camera (see chapter 6.2 Front and rear views of the camera, No. 5). It is used to reboot the network camera or to reset the network camera to the factory default configuration. Depending on the functional problem, rebooting may set the network camera back to normal state. If the problem remains after rebooting, restore the network camera settings to the factory default and install the software again.

Reboot:

Press and release the reset button. The status LED on the front will blink red.

Restore:

Press the reset button continuously until the status LED on the front blinks in red and green simultaneously. Note that all settings will be reset to factory default.

	17

Siemens Building Technologies
Fire Safety & Security Products	05.2009

Image 17

Contents Mjpeg / MPEG4 Trademarks About this documentContacting us Training coursesContents 11.1 General safety precautions SafetyInstallation of the device Target readersSoftware Service and maintenanceCleaning of the device Meaning of the hazard symbols Cmos characteristicsMeaning of the written warning notices Damage due to improper storage of CDFor CCIC1410-LAW Directives and standardsFor CCIC1410-L and CCIC1410-LA Restrictions for France National restrictionsDeclaration of conformity Dimensions Product specifications Technical dataSpecification CCIC1410-L Image system ElectronicsPower supply ConnectorNetwork EnvironmentOrdering data Package contentsVersions of the camera Description of the equipmentPin definitions of input/output only CCIC1410-LA, -LAW Front and rear views of the cameraLED status Connection methodRestore Hardware resetReboot Network setup InstallationInternet connection via a router Internet connection via PPPoE Point-to-Point over Ethernet Internet connection with static IPSet up the CCIC1410 Installation Wizard CCIC1410 Installation WizardCCIC1410 Installation Wizard Open the CCIC1410 Installation Wizard Select a device for the configuration User interface of the CCIC1410 Installation WizardRefreshing the device list and linking to the devices System settingsOpen the system settings Change host name Change administrator passwordPPPoE setting Network settingsAdjust date and time LAN setting Dhcp or fixed IP Wireless Settings page appears Wireless settingMobile access Wireless mode None Auth. ModeKey format Hexadecimal or Ascii Key lengthApply settings to selected device Access from Home Access informationAccess via Internet Access from Quicktime/CellphoneNetwork type Wireless statusUPnP status Ddns statusAdd to my favorite Stream options Client settingsMPEG4 media options MPEG4 protocol options transmission modesUDP unicast 4 MP4 saving options storing destination and file nameUDP multicast File name prefixAdd date and time suffix to the file name Using the CCIC1410 Installation Wizard Configuration with the CCIC1410 HomepageUsing your Web Browser Opening the CCIC1410 HomepageUser interface of the CCIC1410 Homepage Tabs of the CCIC1410 Homepage Live video window of the CCIC1410 Homepage Live video window of CCIC1410 Homepage with MPEG4 modeVolume at your local computer VolumeVideo and audio control buttons Digital zoom edit Start / Stop recordingMjpeg protocol and media options Live video window of CCIC1410 Homepage with Mjpeg modeTurn off the LED indicator Settings for network cameraSystem Host name name for the network cameraDaylight saving time Disable privacy buttonTime zone of system system time Option Description Mark the checkbox Enable daylight saving timeDigital input and digital output Add users Root passwordSecurity Manage users Network type Network connection settingsPPPoE PPPoE Point-to-point protocol over Ethernet Enable UPnP portForwarding Http AuthenticationPrimary stream port / Secondary stream port Stream name3 FTP Rtsp streaming Access name for stream 1 / Access name for stream Ssid Service Set Identifier Wireless LAN settings CCIC1410-LAW onlyChannel Wireless modeTX rate SecurityAuthentication mode Security WEP Wired equivalent PrivacyDefault Key Network Key Key formatAlgorithm WPA-PSKPre-shared Key WPA2-PSKAccess list Ddns settingsEnable Ddns ProviderDenied List section Allowed List and Denied ListDelete allowed list / Delete denied list Colour Audio and video settingsVideo settings Image Settings Power line frequencyVideo orientation Maximum exposure timePrivacy mask Video quality settings for stream 1 / stream Jpeg MPEG-4 Audio type Audio settingsInternal microphone input gain Motion detection settings Enable motion detection Application settings Event name Event settingsEvent Schedule TriggerMedia name Media SettingsVideo clip Media Type SnapshotSystem log Server settingsServer Type Mail Server nameRemote log Alarm serverSystem log Current log View parametersRestore MaintenanceReboot Export daylight saving time configuration file Upload / export daylight saving time configuration fileConfiguration with the CCIC1410 Homepage Upload Daylight Saving Time Configuration File Via the CCIC1410 Installation Wizard Accessing the video streamsUsing Rtsp players Via InternetHttp//ipaddress80/ cgi-bin/liveimage Viewing Mjpeg streaming mediaVideo Mode Using 3GPP-compatible mobile devicesUsing the CCIC1410 Installation Wizard Upgrade firmwareUsing the CCIC1410 Homepage Upgrade firmware Upgrade firmware Upgrade firmware Fixed ~ IndexPage A6V10236594