Siemens CCIC1410 configurationmanual Maintenance, Reboot, Restore

Page 83

Configuration with the CCIC1410 Homepage

1.Open the CCIC1410 Homepage (see chapter 9.1).

2.Choose the Configuration menu.

3.On the left hand side, choose the menu item View parameters. Î The parameter list appears.

9.16Maintenance

This chapter explains how to reset the network camera to the factory default.

9.16.1 Reboot

This feature allows you to restart the network camera. It takes about 1 – 2 minutes to complete the process. When completed, the live video will be displayed in your browser.

1.	Open the CCIC1410 Homepage (see chapter 9.1).
2.	Choose the Configuration menu.
3.	On the left hand side, choose the menu item Maintenance.
4.	In the Reboot section, click Reboot.
	Î The following message is displayed during the rebooting process.
	Î If the connection fails after rebooting, manually enter the IP address of the
	network camera in the address field to resume the connection.
9.16.2 Restore

	This feature allows you to restore the factory default settings of the network
	camera. Two settings can be excluded.
	83

Siemens Building Technologies
Fire Safety & Security Products	05.2009

Image 83

Contents Mjpeg / MPEG4 Training courses About this documentTrademarks Contacting usContents 11.1 Target readers SafetyGeneral safety precautions Installation of the deviceSoftware Service and maintenanceCleaning of the device Damage due to improper storage of CD Cmos characteristicsMeaning of the hazard symbols Meaning of the written warning noticesFor CCIC1410-LAW Directives and standardsFor CCIC1410-L and CCIC1410-LA Restrictions for France National restrictionsDeclaration of conformity Electronics Technical dataDimensions Product specifications Specification CCIC1410-L Image systemEnvironment ConnectorPower supply NetworkOrdering data Package contentsVersions of the camera Description of the equipmentPin definitions of input/output only CCIC1410-LA, -LAW Front and rear views of the cameraLED status Connection methodRestore Hardware resetReboot Network setup InstallationInternet connection via a router Internet connection via PPPoE Point-to-Point over Ethernet Internet connection with static IPSet up the CCIC1410 Installation Wizard CCIC1410 Installation WizardCCIC1410 Installation Wizard Open the CCIC1410 Installation Wizard Select a device for the configuration User interface of the CCIC1410 Installation WizardRefreshing the device list and linking to the devices System settingsOpen the system settings Change host name Change administrator passwordPPPoE setting Network settingsAdjust date and time LAN setting Dhcp or fixed IP Wireless Settings page appears Wireless settingMobile access Wireless mode None Auth. ModeKey format Hexadecimal or Ascii Key lengthApply settings to selected device Access from Quicktime/Cellphone Access informationAccess from Home Access via InternetDdns status Wireless statusNetwork type UPnP statusAdd to my favorite MPEG4 protocol options transmission modes Client settingsStream options MPEG4 media optionsFile name prefix 4 MP4 saving options storing destination and file nameUDP unicast UDP multicastAdd date and time suffix to the file name Opening the CCIC1410 Homepage Configuration with the CCIC1410 HomepageUsing the CCIC1410 Installation Wizard Using your Web BrowserUser interface of the CCIC1410 Homepage Tabs of the CCIC1410 Homepage Live video window of the CCIC1410 Homepage Live video window of CCIC1410 Homepage with MPEG4 modeStart / Stop recording VolumeVolume at your local computer Video and audio control buttons Digital zoom editMjpeg protocol and media options Live video window of CCIC1410 Homepage with Mjpeg modeHost name name for the network camera Settings for network cameraTurn off the LED indicator SystemDaylight saving time Disable privacy buttonTime zone of system system time Option Description Mark the checkbox Enable daylight saving timeDigital input and digital output Add users Root passwordSecurity Manage users Network type Network connection settingsPPPoE PPPoE Point-to-point protocol over Ethernet Enable UPnP portForwarding Stream name AuthenticationHttp Primary stream port / Secondary stream port3 FTP Rtsp streaming Access name for stream 1 / Access name for stream Ssid Service Set Identifier Wireless LAN settings CCIC1410-LAW onlySecurity Wireless modeChannel TX rateKey format Security WEP Wired equivalent PrivacyAuthentication mode Default Key Network KeyWPA2-PSK WPA-PSKAlgorithm Pre-shared KeyProvider Ddns settingsAccess list Enable DdnsDenied List section Allowed List and Denied ListDelete allowed list / Delete denied list Colour Audio and video settingsVideo settings Maximum exposure time Power line frequencyImage Settings Video orientationPrivacy mask Video quality settings for stream 1 / stream Jpeg MPEG-4 Audio type Audio settingsInternal microphone input gain Motion detection settings Enable motion detection Application settings Event name Event settingsEvent Schedule TriggerMedia name Media SettingsVideo clip Media Type SnapshotSystem log Server settingsServer Type Mail Server nameRemote log Alarm serverSystem log Current log View parametersRestore MaintenanceReboot Export daylight saving time configuration file Upload / export daylight saving time configuration fileConfiguration with the CCIC1410 Homepage Upload Daylight Saving Time Configuration File Via Internet Accessing the video streamsVia the CCIC1410 Installation Wizard Using Rtsp playersHttp//ipaddress80/ cgi-bin/liveimage Viewing Mjpeg streaming mediaVideo Mode Using 3GPP-compatible mobile devicesUsing the CCIC1410 Installation Wizard Upgrade firmwareUsing the CCIC1410 Homepage Upgrade firmware Upgrade firmware Upgrade firmware Fixed ~ IndexPage A6V10236594